Tag Archives: usb2-e1000

usb2-e1000_128

Supporting PXE over USB Deployment Scenarios for tablets and ultrabooks

Many enterprise IT admins are facing a new challenge: how to deploy and manage systems with only WiFi for networking and USB for IO ports.  As a result, we’re often asked whether our USB network adapters support PXE boot.  In short, this is the wrong question- Mu. When designing a deployment environment where USB is […]

Read More

Plugable USB Ethernet Adapters – Driver Updates with Windows 8.1 Upgrade

Q: What actions are needed for installing Plugable USB Ethernet adapters when upgrading to Windows 8.1 from Windows 8? Note: these instructions only apply to traditional Intel/AMD based Windows, not Windows RT A: When upgrading from Windows 8 to Windows 8.1, if you have our USB2-E100, it is supported with no additional actions needed as […]

Read More

UPDATED: Plugable Products on Mac OS X 10.8 (aka Mountain Lion)

Listed below are our latest updates about how to make your Plugable products work on Mac OS X 10.8 Mountain Lion with all the caveats shared by customers. If you read this post before and notice changes, it’s because we’ve revised our advice based on differences between our test results and what many customers were […]

Read More

Plugable USB2-E1000 Drivers

Windows If you wish to pre-install drivers before your adapter arrives, just download and run the utility from the link below: Download Windows 10/8/8.1, 7, Vista, and XP drivers After downloading, simply double-click on the .exe file to begin installation. You will receive a confirmation that the process has begun, and another upon successful completion- […]

Read More

USB Gigabit Ethernet speed on Mac OS X

USB to Gigabit Ethernet adapters are especially useful for adding faster wired network capability to otherwise WiFi-only machines like the Macbook Air. You can buy Apple’s branded 10/100 USB adapter — but price-wise, it will cost more than some gigabit adapters (like our Plugable USB Gigabit adapter). A gigabit adapter is also a nice upgrade […]

Read More

Howto: Installing ASIX’s USB Gigabit Ethernet Driver on Mac OS X Lion 10.7

If you plug one of our Plugable USB2-E1000 USB 2.0 to Gigabit Ethernet Adapters or others based on the ASIX 88178 chipset into an Mac Lion system, Apple will match it with the Apple Gigabit Ethernet driver that’s included in Lion. But things often fail on non-Apple adapters in a confusing way: it will show […]

Read More

Howto: ASIX 88178 USB Ethernet Adapter on Ubuntu 10.10 Linux

[update Dec 2011: Linux kernel 3.2 rc3 and later “just work” (with config USB_NET_AX8817X), so the following steps are not needed.] Support for these devices has been in the Linux kernel since kernel 2.6.21 (file /drivers/net/usb/asix.c). However, prior to version 3.2, this driver fails to find an IP address, and comes up “disconnected” To get […]

Read More