A portable Plugable power product for charging on-the-go is here!
The Plugable PB-6K2 Power Bank offers a lightweight, environmentally-friendly, high-capacity, compact battery solution. Whether on the go or at home, this portable battery provides the extra power to keep your devices running.
The universal one amp port means you’ll always be able to charge your devices. Its compact design keeps it light and agile, perfect for any journey. Whether you are traveling on a plane or out camping, the PB-6K2 has the power to keep your devices going.
It recharges easily from any USB port and keeps its charge in storage, so it will always be ready when you need it. To find out how much power remains in the battery, just press the button to activate the power LEDs. A glance will tell you where you stand. The Plugable portable battery is the perfect partner for any adventure.
Designed with compatibility in mind, the Plugable PB-6K2 can charge a multitude of devices, including Apple products (iPad, iPhone, iPod), Blackberry devices, HTC smartphones, Nokia phones, Samsung phones, Motorola phones, Nintendo handheld devices (3DS, DS), Sony handheld devices (Vita, PSP), newer Kindles, and other portable USB-based devices. For a list of tested devices and charging rates, please see the charging FAQ.
Looking for something with a bit more power? Take a look at the PB-12K2.
In the box:
One lithium ion battery; 1 USB 2.0 micro-B cable; user manual.
USB ChargingBattery charging over USB has become a standard practice but the actual charging behavior of different devices is often unpredictable and sometimes disappointing. The devices themselves decide how much current to draw and manufacturers haven’t settled on a single standard. We constantly test our products with as many different devices as possible and publish the results so it’s easy to determine the charging behavior to expect from your device on each of our USB products. These are the results for the devices we’ve tested on this charger so far.
For hubs, "Hosted" means the hub is attached to a host computer that is powered on. "Unhosted" means just the opposite, that the hub isn't attached to a host computer, or that the host computer is turned off. This doesn't apply to stand-alone chargers that only plug in to a wall outlet.
The "Estimated Charging Time" column is the minimum amount of time that the device would take to charge if it was fully drained. This is just an estimate! We provided this to give a general idea of the expected charge time. If this column is blank for a device, that means that the device indicated that it wasn't charging. In this case, even if the device is drawing power, it will likely either "tread water" keeping the battery at a constant level, or slowly lose ground.
Either we got no JSON from the API. Or the basenode-parameter is not ok.
Switch on the Debugmode of the Plugin!
Switch to gutenberg-Blocks!
There the JSON Content Importer Block gives an easier way to use the JSON-APIs.
Or: Switch on the Debugmode by adding "debugmode=10" in the Shortcode.
If all is without success: Open ticket at wordpress.org please