Applicable To

• Plugable DisplayLink-based docking stations and USB graphics adapters

Problem Summary

DisplayLink relies on the computer’s graphics processor to render the Windows desktop before transmitting it to the connected monitors over USB. On some desktop computers, if the graphics processor does not detect a directly connected monitor, the DisplayLink monitors may show a black screen with only the mouse cursor visible.

This is especially common in KVM-style setups where all monitors are connected to a DisplayLink dock that is switched between two computers using a USB Sharing Switch, such as USB3-SWITCH2.

Troubleshooting Steps

1. Ensure the DisplayLink driver is the latest version available from Plugable. To update the driver, please use the steps for your operating system: 
   1. For Windows
   2. For macOS
2. On Windows, install the latest graphics driver available from the computer or graphics card manufacturer’s support page.
3. On macOS, install the latest available macOS updates. Graphics driver updates are included with macOS rather than distributed separately.

Yes, Plugable DisplayLink based products are supported on Windows 11 computers that have a modern ARM processor such as the Qualcomm Snapdragon X Plus or Elite.

The DisplayLink driver for Windows is native for both the x64 and ARM architectures. 

Introduction

This document covers steps to resolve the most common issues enabling video from Plugable products with DisplayLink technology on Mac. In order to use a Plugable DisplayLink device on Mac, the items listed below are required. 

Required Items

1. The DisplayLink Manager Application must be installed on the host Mac

The DisplayLink Manager Application is available to download here

We have detailed installation instructions available at the link below:

macOS Tahoe version 26, macOS Sequoia version 15, macOS Sonoma version 14

2. The DisplayLink Manager Application must be granted the proper security permissions in order to function properly

The DisplayLink Manager application must be granted ‘Screen Recording’ permissions within the macOS ‘Privacy & Security’ settings in order to function. If these permissions are not granted, then the product will not function.

To be clear, no information is actually being recorded.  The DisplayLink Application only needs this permission in order to generate the image shown within the displays connected to the product.

The installation instructions provided in Item #1 provide more detail about this process. 

3. The DisplayLink Manager Application must be actively running

The DisplayLink Manager Application must be running in order for the product’s video outputs to function.

When the DisplayLink Manager Application is running, there will be a small DisplayLink icon (which looks like two interlocking displays) located within the Apple Menu bar at the top of your screen. 

If the DisplayLink Manager Application is not running, please open a new Finder window and navigate to the ‘Applications’ folder and then double click on the ‘DisplayLink Manager’ application icon to start the application. 

4. On Apple Silicon MacBooks with macOS Ventura version 13 or later, the Plugable product must be granted permission in order to connect the device to the Mac

For portable Macs with Apple silicon running macOS Ventura version 13 or later, any external USB accessory must first be ‘Allowed’ in order for the device to function. If the device is not ‘Allowed’, then the device will not work.   
 

Apple provides more information on this process at the links below:

macOS Tahoe 26 - Connect accessories to your Mac

macOS Sequoia 15 - Connect accessories to your Mac

macOS Sonoma 14 - Allow accessories to connect to Mac

macOS Ventura 13 - Allow accessories to connect to Mac

If you need more help

If all of the items listed above have been completed and your Plugable DisplayLink-based device is still not working as expected with your Mac, please reach out to us directly via support@plugable.com and we will be happy to assist you further.    

 

Summary

If a Plugable DisplayLink-based USB docking station or USB graphics adapter is not working as expected with a Mac, performing a clean reinstall of the DisplayLink Manager application can help restore the DisplayLink software and connected hardware to a known-good state.

The recommended process is to disconnect and reset the Plugable product, completely remove the existing DisplayLink software, restart the Mac, install the current Plugable-recommended DisplayLink Manager version, and reconnect the product.

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• Macs using the DisplayLink Manager application

These instructions are specifically for products that use DisplayLink USB graphics technology. They do not apply to Plugable USB-C DisplayPort Alternate Mode, MST, or Thunderbolt-only video products that do not use DisplayLink Manager.

Before You Begin

Save any open work before beginning, as this process requires restarting the Mac.

Keep the Plugable docking station or USB graphics adapter disconnected from the Mac until instructed to reconnect it.

Clean Reinstall DisplayLink Manager

1. Disconnect the Plugable Product

Disconnect the Plugable USB docking station or USB graphics adapter from the Mac.

If the product has an external power adapter, disconnect the power adapter from the product as well. This allows the unit to fully reset.

Keep the Plugable product disconnected until the final step.

2. Run the DisplayLink Installation Cleaner

Download and run the DisplayLink Installation Cleaner for macOS → LINK

If you need additional guidance, see Synaptics' End-User Cleaner Tool for macOS instructions → LINK

Follow the prompts within the cleaner to remove the existing DisplayLink Manager installation and associated components.

3. Restart the Mac

After the DisplayLink Installation Cleaner has completed, restart the Mac using:

Apple menu > Restart

Restart the Mac even if the cleaner does not specifically prompt you to do so.

4. Install the Current Plugable-Recommended DisplayLink Manager Version

Download the DisplayLink Manager version recommended by Plugable for your version of macOS → LINK

Install DisplayLink Manager and complete the required macOS setup and permissions.

Detailed installation instructions for each supported macOS version are available by selecting the INFO button next to the appropriate download on Plugable's DisplayLink Drivers and Software page.

5. Reconnect the Plugable Product

If the Plugable product uses an external power adapter, reconnect power to the product first and allow it to power on.

Then reconnect the Plugable product directly to the Mac.

Confirm that DisplayLink Manager is running and test the connected displays and other device functions.

If the product is still not working as expected, restart the Mac once more with the Plugable product connected.

Need Assistance?

If your Plugable DisplayLink-based product is still not working as expected after completing the clean reinstall process, please contact Plugable Support at support@plugable.com.

• When contacting support, please include:
• Your Plugable product model
• Your Mac model
• Your macOS version
• A description of the issue
• The output from Plugable's PlugDebug diagnostic utility → LINK

Introduction

When a Plugable DisplayLink-based device is not working as expected with a Windows system, the best practice is to disconnect the device from the host system (and remove it's external power source, if it has one) and perform a 'clean' manual installation of the latest version we recommend of the required DisplayLink software driver in order to help ensure that both are in a good state. The process for doing so is described below. If you're running a Mac computer, please refer to our DisplayLink Manager App for macOS installation guide instead.

DisplayLink 'Clean' installation process

1. Disconnect the Plugable USB docking station or video adapter from the host system.

If the product you are using has an external power adapter (for example a USB docking station), please also disconnect the power adapter from the product so that the unit resets. 

Please keep everything disconnected until prompted.

2. Uninstall any and all software with 'DisplayLink' in the title that is present from within the Control Panel Programs and Features (Apps and Features in Windows 10 & 11). Don't worry if these entries are not present or if the process does not work for any reason, just move onto the next step

3. Download and run the DisplayLink Installation Cleaner utility

The link to download is here --> LINK

We also have a short video that demonstrates this process --> LINK

4. Once the cleaning utility has completed, restart the host system (even if not prompted to)

5. Download and install the latest version (that we recommend) of the DisplayLink software driver --> LINK

6. If you disconnected the power adapter from your product in step one, please reconnect it so the device powers on, then reconnect the product to the host system. If the product is still not working as expected, please restart the host system one more time.

If you need additional help

If after having completed this process your Plugable DisplayLink device is still not working as expected, please reach out to us directly via support@plugable.com with the output of our PlugDebug diagnostic utility --> LINK and we will be happy to assist you further.

The graphical software utilities provided by Intel, NVIDIA, and AMD/ATI are designed to only recognize and work with graphics adapters made by their respective manufacturers. As a result, these utilities will not recognize USB-attached displays connected to a DisplayLink-based docking station or graphics adapter.

How to Manage Connected Displays

It is recommended to use the built-in Windows display management tools instead. For Windows 10 and 11, use the 'Display Settings' application, and for Windows 8.1 and 7, use the 'Screen Resolution' application. You can access these tools by right-clicking an empty space on the Windows desktop and selecting the appropriate option from the context menu.

Alternative Option for Intel Users

Intel offers an updated 'Intel Graphics Command Center' application that can recognize and configure DisplayLink-attached displays to a certain extent. However, some features specific to Intel graphics adapters within this application may still not work on a DisplayLink-attached display.

Applicable To

• Plugable DisplayLink-based docking stations and graphics adapters

Summary

Windows display color calibration may not affect a monitor connected through a Plugable DisplayLink-based docking station or USB graphics adapter.

DisplayLink software can support gamma-based color correction on certain DisplayLink hardware and outputs, but this functionality is not universally available or enabled across all DisplayLink configurations.

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• Windows 10 and Windows 11

Answer

Older versions of DisplayLink software did not support software-based gamma color correction. However, DisplayLink added gamma-ramp color correction support beginning with DisplayLink software version 9.0 for certain DisplayLink devices.

Because support depends on the DisplayLink chipset, video output, driver configuration, and software being used, the Windows Display Color Calibration tool may have little or no effect on some DisplayLink-connected displays.

For basic color adjustments such as brightness, contrast, color temperature, or RGB levels, Plugable recommends using the monitor's built-in on-screen display (OSD) controls when available.

For supported DisplayLink hardware, Synaptics provides additional guidance for enabling gamma-ramp color correction in Windows.

Color-Critical Workflows

For workflows that require highly accurate or hardware-calibrated color, such as professional photography, video production, or print color matching, Plugable recommends connecting the color-critical display directly to a native graphics output from the computer whenever possible.

This may include HDMI, DisplayPort, Thunderbolt, or USB-C DisplayPort Alternate Mode, depending on the computer.

Need Assistance?

If you need help determining whether software-based color correction is supported with your Plugable DisplayLink product, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

• Your Plugable product model
• Your computer model
• Your monitor model
• Your Windows version
• How the monitor is connected to the Plugable product

Touchscreens that do not require drivers and use the host’s operating system’s built-in USB Human Interface drivers (HID) to record touch inputs can be made to work with our products, however Plugable does not provide support for doing so due the complexity of multi-monitor touch screen setups.

No, the DisplayLink device's presence on your system will not preclude the use of any of your system’s built-in video outputs.

The use of Powerline-based network adapters in conjunction with the Ethernet port within our DisplayLink-based docking stations or video adapters is not supported.

Summary

Windows does not normally provide a brightness control in Display Settings for external monitors connected through a Plugable DisplayLink-based docking station or USB graphics adapter.

To adjust the brightness of an external monitor, use the monitor's built-in controls or on-screen display (OSD).

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• External monitors connected through DisplayLink on Windows 11 or Windows 10

Answer

The brightness slider available in Settings > System > Display is primarily intended for supported built-in displays, such as a laptop's internal screen.

When using an external monitor connected through a Plugable DisplayLink-based dock or video adapter, Windows may not provide a brightness slider for that display.

To adjust the monitor's brightness:

1. Use the physical buttons, joystick, or other controls on the monitor.
2. Open the monitor's on-screen display (OSD).
3. Locate the Brightness or Picture settings.
4. Adjust the brightness to the desired level.

Optional Software-Based Brightness Control

Some monitors support DDC/CI, which allows compatible software to control monitor settings such as brightness and contrast.

DisplayLink supports DDC/CI communication with compatible monitors, so a third-party DDC/CI utility may be able to adjust the brightness of a DisplayLink-connected monitor.

Support depends on the monitor, DisplayLink device, and software being used. Plugable recommends using the monitor's built-in controls when possible.

Need Assistance?

If you are having difficulty adjusting or configuring a display connected through a Plugable DisplayLink-based product, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

• Your Plugable product model
• Your computer model
• Your monitor model
• Your Windows version
• How the monitor is connected to the Plugable product

Summary

Plugable does not recommend or support using a traditional KVM switch with a Plugable DisplayLink-based docking station. Traditional KVM switches are designed to switch a computer's direct video output, keyboard, and mouse between systems. DisplayLink-based docking stations work differently because their video output is generated through USB data and DisplayLink software on the active host computer.

If you need to share a compatible USB 3.0 DisplayLink-based docking station between two computers, the recommended options are to manually move the dock's USB host cable between computers or use the Plugable USB3-SWITCH2 USB 3.0 Sharing Switch. The dock can only be used by one computer at a time.

The USB3-SWITCH2 option applies only to compatible USB 3.0 DisplayLink-based docking stations. It is not compatible with USB-C or Thunderbolt docks and hubs that rely on USB-C Power Delivery, USB-C DisplayPort Alternate Mode, USB4, or Thunderbolt features.

Applicable To

This article does not apply to USB-C or Thunderbolt docking stations and hubs that require USB-C Power Delivery, USB-C DisplayPort Alternate Mode, USB4, or Thunderbolt connectivity. Those products should be connected directly to the computer using the cable and connection type specified for that product.

Answer

Plugable does not recommend or support using a traditional KVM switch with a Plugable DisplayLink-based docking station.

A traditional KVM switch expects each computer to provide a direct video signal, such as HDMI, DisplayPort, DVI, or VGA, along with USB keyboard and mouse input. A DisplayLink-based docking station does not work like a passive video connection. Instead, the computer uses DisplayLink software to send compressed display data over USB to the DisplayLink chipset inside the dock, and the dock then outputs video to the connected monitor or monitors.

Because of this design, placing a traditional KVM switch into the display path or attempting to switch the dock as if it were a normal direct video connection can lead to detection issues, lost displays, incorrect display arrangement, blank screens, or unreliable behavior. This type of setup is not a supported Plugable configuration.

If the goal is to share one compatible USB 3.0 DisplayLink-based docking station between two computers, the better option is to switch the dock's USB connection between the computers. This can be done manually by moving the dock's USB host cable from one computer to the other, or by using the Plugable USB3-SWITCH2 with compatible USB 3.0 DisplayLink-based docks.

Why Traditional KVM Switches Are Not Recommended

DisplayLink video is an indirect display technology. The displays connected to the dock depend on the active host computer, the DisplayLink driver or DisplayLink Manager software, the USB data connection, and the DisplayLink chipset inside the dock.

A traditional video KVM switch generally expects a direct GPU video signal from each computer. This can be a poor match for a DisplayLink dock because the display signal is not coming directly from the computer's HDMI, DisplayPort, DVI, or VGA port. It is being created by the dock after the DisplayLink USB connection has been established.

For that reason, the most reliable way to move a DisplayLink dock between computers is to treat the dock like a USB device: disconnect it from one computer, then connect it to the other computer. USB3-SWITCH2 provides a more convenient way to perform that USB switch for compatible USB 3.0 DisplayLink docks.

Recommended Options

Before You Begin

If you plan to use USB3-SWITCH2 with a compatible USB 3.0 DisplayLink-based docking station, confirm the following first:

• The dock is a USB 3.0 DisplayLink-based dock with a standard USB data connection to the host.
• The dock is not a USB-C or Thunderbolt dock that requires USB-C Power Delivery, USB-C DisplayPort Alternate Mode, USB4, or Thunderbolt features.
• Both computers have the required DisplayLink software installed.
• Both computers meet the operating system requirements for the DisplayLink-based dock.
• Each laptop has its own power adapter connected if charging is needed. USB3-SWITCH2 does not charge laptops.
• Only one computer will use the dock at a time. The inactive computer will not have access to the dock, displays, Ethernet, audio, or USB devices connected through the dock.

How to Share a Compatible USB 3.0 DisplayLink Dock Using USB3-SWITCH2

1. Install the required DisplayLink software on both computers.
2. Connect the Plugable DisplayLink docking station to its power adapter.
3. Connect your displays, keyboard, mouse, Ethernet cable, speakers, or other peripherals to the docking station.
4. Connect the dock's upstream USB host connection to the shared USB device port on the USB3-SWITCH2.
5. Connect each computer to one of the USB3-SWITCH2 host ports using the USB cables included with the switch.
6. If either computer only has USB-C ports, use an appropriate USB-C to USB-A adapter on the computer side of the USB3-SWITCH2 connection.
7. Connect each laptop to its own charger if charging is required.
8. Press the button on the USB3-SWITCH2 to select which computer has control of the dock.
9. Wait for the operating system to detect the dock and restore the displays and connected devices.

Switching between computers acts like unplugging the dock from one computer and plugging it into the other. A short delay while the dock, displays, Ethernet, audio, and USB devices reconnect is normal.

Important Notes

• USB3-SWITCH2 is a USB sharing switch, not a traditional video KVM switch.
• The dock can only be controlled by one computer at a time.
• USB3-SWITCH2 does not provide laptop charging. Keep each laptop's normal charger connected if charging is needed.
• USB3-SWITCH2 is not compatible with USB-C or Thunderbolt docks and hubs, even when using adapters.
• Do not switch computers while files are actively being transferred to or from USB storage devices connected through the dock. Switching the active host disconnects USB devices from the previous computer.
• Display arrangement, scaling, resolution, and audio settings are stored by each computer's operating system, not by the dock. Each computer may need to be configured separately after the first connection.

Troubleshooting

1. The dock does not reconnect after switching computers

Wait 10 to 20 seconds after pressing the switch button. If the dock still does not reconnect, confirm that the correct host LED is active on the USB3-SWITCH2, then disconnect and reconnect the dock's USB cable from the switch.

If the issue continues, connect the dock directly to each computer without the USB3-SWITCH2. This helps determine whether the issue is related to the dock, the computer, the USB switch, or the cabling.

2. The displays do not appear on one computer

Confirm that the DisplayLink software is installed and running on that computer. Then test the dock directly connected to the computer. If the dock works when connected directly but not through the USB3-SWITCH2, try a different USB port on the computer and use the shortest practical USB cables.

3. The setup works on one computer but not the other

This usually points to a host-specific issue. Check that the second computer has the required DisplayLink software installed, supports the operating system requirements for the dock, and is connected to a working USB 3.0 or faster port.

4. A USB-C or Thunderbolt dock does not work through USB3-SWITCH2

This is expected. USB3-SWITCH2 does not support USB-C Power Delivery, USB-C DisplayPort Alternate Mode, USB4, or Thunderbolt features. USB-C and Thunderbolt docks that depend on those features should be connected directly to the host computer.

5. The laptop does not charge through the USB3-SWITCH2

USB3-SWITCH2 does not provide laptop charging. If the laptop needs power, connect the laptop's normal charger directly to the laptop or use the charging method recommended for that computer.

6. USB storage devices disconnect when switching computers

Switching the USB3-SWITCH2 disconnects the dock and its attached USB devices from the previously active computer. Eject or safely remove USB storage devices before switching, and do not switch while a file transfer is in progress.

Need Assistance?

If you are unsure whether your Plugable DisplayLink-based dock is compatible with USB3-SWITCH2, or if the dock is not working as expected after following the steps above, contact Plugable Support at support@plugable.com.

Please include the Plugable dock model, the model of the switch or KVM being used, both computer models, both operating system versions, and a brief description of how everything is connected.

For the fastest assistance, please also include the output from Plugable's PlugDebug diagnostic utility from each computer: PlugDebug.

Applicable To

• Docking Stations based on DisplayLink technology

Problem Summary

Connecting a USB 3.0 device to a laptop system can generate radio frequency interference that affects the performance of the laptop's built-in Wi-Fi adapter or wireless keyboard and mouse receivers. 

This behaviour is not specific to Plugable products, and Intel has published a white paper on the topic for those who are curious about the technical details.

white paper 

Troubleshooting Steps

So now that we know that this can happen with any type of USB 3.0 connection, how do we solve the problem should it occur? Every person’s setup can be a little different so there will never be one definitive solution, but a few simple approaches can solve the problem in most cases:

• Option One—Move the device as far as away from the system as the USB cable will allow. This will try and ‘move’ the signals from both the USB connection and the Wi-Fi physically further apart. As a corollary to this, if the dock is located very close to the Wi-Fi router itself, placing more distance between the two can help.
• Option Two—Switch to a different USB port on the system, preferably one on the opposite side of the laptop. This employs the same approach as option one, in that physically separating the two signals (in this case the physical proximity of the USB connection and the internal Wi-Fi antennas within your system) can help. If your system has both USB 3.0 and USB 2.0 ports, try using the USB 2.0 port first.
• Option Three—Use a USB 2.0 cable, like one used connect to a USB printer, instead of a USB 3.0 cable. All USB 3.0 devices should be backward compatible with a USB 2.0 cable, and when a device is connected at USB 2.0 speeds there is no possibility for the interference.
• Option Four—Switch to using a 5GHz Wi-Fi connection. As the name implies, there are two common sets of frequencies used by most Wi-Fi networks (2.4GHz and 5GHz). If both your wireless router and the wireless network adapter in your system support a 5GHz connection (they both need to, one is not enough), connecting to your Wi-Fi in that manner will prevent the interference from happening due to the two very different frequencies in use.
• Option Five—If using a 5GHz connection is not possible, changing the ‘channel’ of a 2.4 GHz connection can help. Within the 2.4GHz band used for Wi-Fi, there are eleven different channels each using a slightly different frequency. The three most commonly used ones in the United States are channel 1, 6 and 11. Using the manual for your wireless router as a guide, switching channels can potentially help. Ideally you would want to switch the channel to the opposite end of the spectrum for the best results, for example if you are on channel one already try switching to channel eleven or vice-versa

Wireless Mouse or Wireless Keyboard Performance Issues (Radio Frequency Interference)

While the items listed above can help with Wi-Fi interference, there is another type of interference that can sometimes cause problems with wireless keyboards and wireless mice which we refer to as Radio Frequency (RF) interference. 

To expand further, the USB wireless receiver 'dongles' used by many wireless keyboards and wireless mice operate within the same 2.4GHz radio frequency range as many Wi-Fi adapters. 

If a USB 3.0 connection is generating interference, this can affect the behaviour of a wireless keyboard or wireless mouse. This behaviour typically manifests as inconsistent mouse movement and/or inconsistent or sporadic keystroke registration.

In general there are two methods to mitigate this behaviour should it occur:

• RF Option One—Reconnect the USB wireless receiver 'dongle' to one of the USB Docking Station's USB 2.0 ports (if the dock has USB 2.0 ports), furthest away from the USB 3.0 host connection cable. Moving the USB receiver to a USB 2.0 port typically mitigates this interference.
• RF Option Two—In rarer cases when moving the receiver is not enough or if the product in question does not have a USB 2.0 port, adding a short USB 2.0 extension cable can also help mitigate the behavior. In many cases wireless mice or keyboards include such a cable for this very reason, but if one is not available our USB2-2PORT is a good alternative solution.

If the Issue Persists

In some less common instances on Windows computers, erratic keyboard/mouse behaviour can be related to an issue with Intel Management Engine. We've written about this issue and the workaround that may fix it in another article in our Knowledge Base: My Mouse/Keyboard Is Not Working Well When Connected to the Device

Unsure which version of macOS you have installed? Click on the ‘Apple’ icon in the menu bar on your desktop and select ‘About this Mac’. A new window will open and display the system’s macOS version.

Running a newer version of macOS? Refer to our macOS 26 Tahoe, macOS 15 Sequoia, and macOS 14 Sonoma installation guide instead.

How to install the DisplayLink Manager application

1. Download the DisplayLink Manager from our drivers page here: https://plugable.com/pages/displaylink#macos

2. Open the DisplayLink Manager Graphics Connectivity 1.x.pkg

3. Click ‘Continue’ on ‘Introduction’ page

4. Click ‘Continue’ on ‘Licence’ page

5. Click ‘Agree’ when prompted

6. Click ‘Install’ on ‘Installation Type’ page

7. Input your password when prompted

8. When installation finishes click ‘Close’ on ‘Summary’ page

9. Click’ Move to bin’ when prompted

How to use DisplayLink Manager?

The following steps are to be followed once after installing the app.

1. After installation, the DisplayLink Manager app will start automatically and the DisplayLink Manager logo will show in the Menu Bar. It will be grey when the dock is disconnected (Connection status will show: No monitor detected) and white when connected (Connection status will show: Monitor detected). 

NOTE: The DisplayLink Manager app will only start on its own once after the initial installation. Step 5 shows how to setup the app to always start after logging-in (recommended). Otherwise the app has to be started manually each time (see step 2).

2. In case the app does not show in your Menu Bar, to start it manually, please press ‘command’ + ’space’ and type in DisplayLink Manager, click on the application to open it

a. Alternatively you can go to the Applications folder in Finder and click on the DisplayLink Manager there

3. When first opened, DisplayLink Manager will ask you to turn on notifications for the app. Click on the notification below when it shows up. It will open a Notifications window.

4. Turn on ‘Allow Notifications’ for DisplayLink Manager

5. Select “Launch automatically after logging-in” for the software to start automatically every time you log-in.

6. Screen Recording

NOTE: From macOS Catalina 10.15, the operating system requires the user to permit "Screen Recording" in order for DisplayLink based devices (like Plugable UD-3900) to work properly. The message is generated by the OS and the screen is not actually being recorded by DisplayLink. Approving it enables the DisplayLink driver to access the pixels it needs to render a mirrored or extended screen and send the pixels over USB from your computer to the DisplayLink display. DisplayLink Manager does not store or record any screen content.

a. If you enabled notifications in step 3 you will see the below message if Screen Recording is switched off

b. This message will also show in the DisplayLink Manager app window and there will be an exclamation mark ‘!’ next to the DisplayLink Manager icon.

7. To enable “Screen Recording”

a. Go to System Preferences and click on Security & Privacy

b. In the ‘Privacy’ tab scroll down to ‘Screen Recording’ and click on the padlock to make changes

c. Enter password to allow the system to make changes

d. Tick the box next to ‘DisplayLink Manager’ and click ‘Quit and reopen’ when prompted.

e. Click on a padlock to save the changes.

Other functions of the DisplayLink Manager

Login screen extension (Optional)

This enables the external screens to be available on the login screen prior to the app loading after logging into your account.

1. Download the Login Screen Extension from the link available on the front page of the DisplayLink Manager.

2. Install the extension.

3. Once the installation is complete the extension will show as ‘Installed’

Support

NOTE: Opening a ticket through the Support tab will contact the DisplayLink engineering team in Europe. We recommend contacting support@plugable.com if you have any questions or issues. 

Before you begin

Unsure which version of macOS you have installed on your Mac? Click on the ‘Apple’ icon within the menu bar located at the top of your desktop and select ‘About this Mac’. A new window will open and display the system’s macOS version.

Running a newer version of macOS? Refer to our macOS 26 Tahoe, macOS 15 Sequoia, and macOS 14 Sonoma installation guide instead.

Guided Video Demonstration

For those who prefer, we have a video demonstration of the installation procedure available (an embedded link is below). 

For those who prefer, a detailed text-based description of the installation process (including screenshots) is available within the next section.  

How to install the DisplayLink Manager application

1. Download the correct version of the DisplayLink Manager Application for your version of macOS from here → Link 

2. Double-click on the file you downloaded to start the application installer: 

3. From within the ‘Introduction’ section of the application installer,  click on the ‘Continue’ button to start the installation process:

4. After having read the license information from within the ‘License’ section of the application installer, click on the ‘Continue’ button 

5. Click on the ‘Agree’ button in order to agree to the software license agreement.

6. From within the ‘Installation Type’ section of the application installer, click on the ‘Install’ button:

7. When prompted, please enter your system password and click on the ‘Install Software’ button to start the installation. The installation process will begin:

8. The application installer will notify you when the installation process has been completed. Please click on the ‘Close’ button in order to close the application installer. 

*** NOTE - If the installation process does not complete successfully, please see this knowledge base article --> LINK for a list of potential causes and possible solutions. ***

9. You should see a request from the DisplayLink Manager Application to allow the application to display notifications, when necessary.  Click on the ‘Options’ button within the request and click the ‘Allow’ option:

10. Once the application installation is complete, please connect your DisplayLink device to your Mac

11. Once the device is connected, macOS will notify you that the ‘DisplayLink Manager’ application would like to record the computer’s screen. Click the ‘Open System Preferences’ button in order to grant this access.  

12. The ‘Security & Privacy’ application will open, with the default view showing the ‘Privacy’ tab with the ‘Screen Recording’ option selected by default:

13. Click on the gold padlock at the bottom of the application window to enable changes.

14. If prompted, enter your password and click the ‘Unlock’ button:

15. Click to place a checkmark next to the DisplayLink Manager entry:

16. You will be prompted to Quit and Reopen the DisplayLink Manager application in order for the change to take effect. Please do so:

18. Once this change is complete, the displays connected to your DisplayLink-based product will start working automatically.  

** Please note - The DisplayLink Manager Application does NOT in fact record or store any information. This permission must be granted in order for the DisplayLink Application to access the information it needs in order to generate the image shown on the DisplayLink-connected displays. **

19. Click on the DisplayLink Manager Application icon that is now present within the Apple Menu bar at the top of your screen. This will reveal the DisplayLink Manager Application status window:

20. Within the DisplayLink Manager Application status window, next to the ‘Automatic startup’ section, click to place a checkmark next to the ‘Launch automatically after login’ option. This ensures that the application will be started each time you start your Mac. 

21. In order to receive notifications from macOS while a DisplayLink device is connected to your Mac, you must make a change within the ‘Notifications & Focus’ System Preferences application. 

Click on the ‘System Preferences’ icon (which looks like a gear) within the macOS Dock at the bottom of your screen.  

Click on the ‘Notifications & Focus’ application icon:

22. Within the ‘Notifications’ tab of the ‘Notifications & Focus’ application, next to the ‘Allow notifications’ label, click to place a checkmark next to the ‘When mirroring or sharing the display’ option. This will allow you to receive notifications from macOS while the DisplayLink device is connected. 

23. Once all of the previous steps are done, the installation process is now complete.

How to use DisplayLink Manager for macOS

Once the DisplayLink Manager Application is installed, the application can be accessed via the DisplayLink Manager application status icon located within the Apple Menu Bar at the top of your screen:

** If the DisplayLink Manager Application status icon is not visible within the Menu Bar, then the application has not been started.  Please open a new ‘Finder’ window and navigate to the ‘Applications’ folder.  Within the ‘Applications’ folder, double-click on the DisplayLink Application icon in order to start the application. **

Within the ‘Home’ tab of the DisplayLink Manager Application, there are a few different items listed.  The items listed will vary depending upon which version of the DisplayLink Manager Application that is installed, and the following list describes the features present in DisplayLink Manager version 1.7.1.  

Login Screen Extension

By default, the ‘Login screen extension status:’ section will display, “Available to download and Install”

When an Apple Mac system is first powered on and reaches the login prompt, 3rd-party applications (such as the DisplayLink Manager application) are not yet running.  As a result, DisplayLink-connected displays will not function. 

Downloading and installing the Login screen extension (available by clicking on the ‘download’ link within DisplayLink Manager) will allow the DisplayLink-connected displays to function prior to logging in.  

This is of course an optional feature, and is not required to use DisplayLink devices.  However, this option is useful in certain situations, such as when only DisplayLink-connected displays are connected to the host Mac. 

Automatic startup

As the name suggests, placing a checkmark next to the ‘Launch automatically after login’ option allows the DisplayLink Application to start automatically each time the system is powered on. We recommend checking this option in the interest of efficiency. 

Apple Watch unlock

As the name suggests, placing a checkmark next to the ‘Use Apple Watch to unlock on the login screen’ will allow you to unlock your Mac using an Apple Watch while connected to a DisplayLink device. 

Apple has more information on this process here → https://support.apple.com/en-us/HT206995 

** Please note that this feature is not compatible with screensavers. To use Apple Watch unlock with your DisplayLink device, you must disable your screensaver. **

f.lux app support (Beta)

There is a 3rd-party application called 'f.lux' --> https://justgetflux.com/  that allows the adjustment of a display's color according to the time of day. If the f.lux application has been installed, placing a checkmark next to the 'f.lux app support (Beta)' option will enable f.lux to change the color of a DisplayLink connected display.

A few important notes about this feature:

A. This functionality is in 'beta' status, as the label suggests.  As a result, there may be cases where things may not work as expected when this option is enabled. 

B. This functionality is supported with devices based on the DisplayLink DL-3xxx chipset, DL-5xxx chipset, and DL-6xxx chipset.  However, it is important to note that on DL-6xxx chipsets this functionality is limited to DisplayPort video outputs only. It is NOT supported on HDMI video outputs via DL-6xxx chipsets.

System sleep in display-closed mode

Mac laptops running macOS 12 Monterey or newer can be used in one of two ways when used in conjunction with a DisplayLink-based product. 

The first way is with the laptop lid open, with the laptop's built-in internal display enabled.  

The second way is with the laptop lid closed, with the laptop's built-in internal display disabled.  This is known as closed display mode or 'clamshell' mode. 

In order to enter closed display mode while connected to a DisplayLink-based product, the host Mac must have an external power source connected and an external keyboard and mouse connected. 

Placing a checkmark next to 'Power save all displays and sleep in clamshell' changes this behavior, in that closing the laptop lid will cause the host Mac to go to sleep. 

This feature is of course optional, and its use is a matter of personal preference.  

Display rotation and toggle

The functionality presented within this section of the DisplayLink Manager Application will vary depending upon which type of processor is within the host Mac.

Macs with an Intel processor

When DisplayLink devices are used in conjunction with Apple Mac systems that have an Intel processor, a list of all the DisplayLink-connected displays will appear within this section. 

The individual displays can be turned on or off as desired by clicking on the toggle switch next to each display's name. You can differentiate between each display by hovering the mouse pointer over each display name.  When doing so, a red identification box will appear within the selected display.

You can rotate the orientation of the DisplayLink-connected displays within the ‘Displays’ macOS System Preferences application.

Macs with an Apple M1 or M2 processor

When DisplayLink devices are used in conjunction with Apple Mac systems that have an Apple M1 or M2 processor, display rotation must be done from within the DisplayLink Manager Application and the host Mac must be running macOS 12 Monterey or later (display rotation is not available on M1 Macs running macOS 11 Big Sur). 

Each DisplayLink-connected display attached to the M1 or M2 system will be listed next to the ‘Display rotation’ area. Click on the drop-down selection box and select the appropriate degree of rotation. 

If multiple displays are present, you can differentiate between each display by hovering the mouse pointer over each display name.  When doing so, a red identification box will appear within the selected display.

Synaptics (the creators of DisplayLink technology) have more information on this feature here --> Link

In addition to the rotation aspect described above, the individual displays can be turned on or off as desired by clicking on the toggle switch next to each display's name.  As mentioned above, you can differentiate between each display by hovering the mouse pointer over each display name.  When doing so, a red identification box will appear within the selected display.

Summary

If the displays connected through a Plugable DisplayLink-based docking station or USB graphics adapter stopped working after upgrading to macOS 13 Ventura, DisplayLink Manager may no longer be running correctly or may no longer have the required macOS Screen Recording permission.

First confirm that DisplayLink Manager is running and has the required permission. If the displays are still not working, perform a clean reinstall using the current Plugable-recommended DisplayLink Manager version for macOS 13.

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• Macs running macOS 13 Ventura

If you are using macOS 14 Sonoma, macOS 15 Sequoia, macOS 26 Tahoe, or a newer version of macOS, refer to Plugable's current DisplayLink troubleshooting guidance instead.

Answer

DisplayLink-connected displays require the DisplayLink Manager application to be installed, running, and granted the required macOS Screen Recording permission.

A macOS update may require DisplayLink Manager or its permissions to be restored before DisplayLink-connected displays will work again.

1. Confirm DisplayLink Manager Is Running

Open Finder > Applications and launch DisplayLink Manager.

Confirm that the DisplayLink Manager icon appears in the macOS menu bar.

If the displays begin working, no additional steps are required.

2. Check Screen Recording Permission

Open:

Apple menu > System Settings > Privacy & Security > Screen Recording

Confirm that DisplayLink Manager is enabled.

If you enable or change this permission, macOS may require DisplayLink Manager to quit and reopen before the change takes effect.

If the displays are still not working, continue to the clean reinstall procedure below.

Clean Reinstall DisplayLink Manager

1. Disconnect the Plugable Product

Disconnect the Plugable DisplayLink-based docking station or USB graphics adapter from the Mac.

If the product has an external power adapter, disconnect power from the product as well.

2. Remove DisplayLink Manager

Use the DisplayLink Installation Cleaner for macOS to completely remove DisplayLink Manager and its associated components.

For detailed instructions, see:

How to Uninstall DisplayLink Manager Software on macOS

3. Restart the Mac

After the cleanup is complete, restart the Mac using:

Apple menu > Restart

4. Install the Current macOS 13 DisplayLink Manager Version

Download the current Plugable-recommended DisplayLink Manager version for macOS 13 Ventura from Plugable's DisplayLink Drivers and Software page.

Follow Plugable's macOS 13 DisplayLink Manager installation instructions to complete the installation and grant the required macOS permissions.

5. Reconnect the Plugable Product

After installation is complete:

1. Reconnect power to the Plugable product, if applicable.
2. Reconnect the Plugable product to the Mac.
3. Confirm that DisplayLink Manager is running.
4. Confirm that the external displays are detected.

Important Note

macOS 13 Ventura is a legacy macOS release. Plugable provides a specific legacy DisplayLink Manager version for macOS 13.

Do not install a DisplayLink Manager version intended only for newer macOS releases. Use the version listed for macOS 13 on Plugable's DisplayLink Drivers and Software page.

Need Assistance?

If your DisplayLink-connected displays are still not working after completing the steps above, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

1. Your Plugable product model
2. Your Mac model
3. Your macOS version
4. Your DisplayLink Manager version
5. The make and model of the connected displays
6. A description of what occurred before the displays stopped working
7. The output from Plugable's diagnostic tool, PlugDebug

Many streaming video services require High-bandwidth Digital Content Protection (HDCP) enabled devices from the video source all the way to the display.  We speak more to HDCP here (https://kb.plugable.com/en_US/docking-stations-and-video/381072-video-hdcp). The DisplayLink hardware and software used to enable multiple external displays with our docking stations requires enabling the "Screen Recording" permissions in macOS, which disables HDCP video playback system-wide.

Why DisplayLink Disables HDCP Video Playback

The DisplayLink software renders the external display and transmits it as USB data to the docking station. Apple does not have a specific security category for USB external displays, so "Screen Recording" is the required setting. This disables HDCP system-wide because there is no differentiation within macOS for the DisplayLink-controlled external displays from the displays controlled by the internal graphics controller.

Working Around HDCP Limitations

To view HDCP-protected content, a DisplayLink-based docking station/video adapter cannot be used to connect any displays. Thunderbolt docks can sometimes be a suitable alternative solution which does support playback of HDCP-protected content.

Keep in mind that the total number of display connections available through a Thunderbolt dock is dependent on your specific Mac model:

• Base M1 and M2 Apple Silicon chips natively support only a single external display via Thunderbolt.

• Base M3 Apple Silicon chips natively support up to two external displays, but only when the laptop lid is closed.

• Base M4 and M5 Apple Silicon chips natively support up to two external displays.

• Pro versions of the M1, M2, M3, M4, and M5 chips natively support up to two external displays.

• Max versions of the M1, M2, M3, M4, and M5 chips natively support up to four external displays depending on the specific port configuration used.

Please feel free to contact our support team at 'support@plugable.com' if you have any additional questions regarding HDCP compatibility, video playback, or multiple display support with your computer.

Applies to:

Apple Mac computers with external displays connected through:

• Plugable USB-C Triple Display Docking Stations with DisplayLink USB Graphics Technology
• Plugable USB 3.0 Dual Display Docking Stations with DisplayLink USB Graphics Technology
• Plugable USB 3.0 Graphics Adapters with DisplayLink USB Graphics Technology

External displays connected to our DisplayLink based docking stations or graphics adapters may intermittently "blink" off and on again, flicker, or reset - moving active windows to another display.

Common Causes

For Windows 10 and Windows 11 host computers, the most common cause is out of date graphics hardware drivers, or DisplayLink graphics software. Most Windows computers receive updated graphics drivers through Windows Update, however this often provides significantly out of date drivers, some dating back over two years, that may not be fully compatible with the installed version of Windows.

Graphics controller manufacturers provide the latest graphics drivers from their websites, these generally provide better performance, security, and compatibility than the out of date drivers from Windows Update or the system manufacturer's website.

The exception to the above is for systems with two or more active graphics controllers, for example a laptop computer may have an Intel Graphics Controller built into the processor, as well as an NVIDIA Graphics Controller with the operating system automatically switching between the two graphics controllers based on the applications running on the computer. These systems require a delicate balance between the graphics drivers for the primary and secondary graphics controllers, Windows version, and the DisplayLink software.

Determining your computer's graphics controller

Most hardware manufacturer's provide a single unified driver package for a wide range of graphics controllers, however it is best practice to ensure the drivers are compatible with the hardware. We can look up the graphics controller through Windows "msinfo32.exe" System Information application:

1. Open the Start Menu
2. Search for "msinfo32" then select the b est match "System Information App"
3. Note the "Processor" model details in the "System Summary" section, as some graphics drivers are referenced by the processor model
4. In the left pane, expand the section "System Summary > Components" and then select "Display"
5. In the right pane note the value for the item "Name", this will be the graphics controller for discrete graphics controller

Updating the Graphics Drivers to the latest version

For systems with Intel Graphics Controllers

Intel uses a unified driver installer for all of their processor graphics from the 6th Generation CPU onward (Intel i-series 6000 and newer).

1. Download the latest Intel Graphics Drivers from Intel's website by selecting the blue "Download" button for the graphics driver ".exe" file (normally the top option). Save this file to the Downloads directory or Desktop
   
2. Save and close any open applications, unplug the docking station or graphics adapter from the computer, and connect the original power supply (for laptop/notebook computers)
3. Right-click on the Intel Graphics Driver package and select "Run as Administrator" from the drop down menu
4. Allow the installer in the Windows User Account Control pop-up
5. Follow the on screen instructions to install the latest graphics drivers
   -If there is an error message while updating the graphics drivers with regard to an "OEM" or "System Manufacturer's" driver or that these drivers are incompatible with the computer, Intel provides additional details and steps to remove OEM or legacy drivers from the system
6. When complete, restart the computer before reconnecting the docking station or graphics adapter

For systems with NVIDIA Graphics Controllers

NVIDIA also uses a unified driver installer for most of their discrete desktop and notebook graphics controllers.

1. Locate and download the latest NVIDIA graphics driver using the graphics controller model details from msinfo32, save the file to the Downloads directory or Desktop
   
2. Save and close any open applications, unplug the docking station or graphics adapter from the computer, and connect the original power supply (for laptop/notebook computers)
3. Right-click on the NVIDIA Graphics Driver package and select "Run as Administrator" from the drop down menu
4. Allow the installer in the Windows User Account Control pop-up
5. Follow the on screen instructions to install the latest graphics driver, select the "Custom" or "Advanced" installation option if available, at the custom installation screen select the option to "Perform a clean installation"
6. When complete, restart the computer before reconnecting the docking station or graphics adapter

For systems with AMD Graphics Controllers

AMD also uses a unified driver installer for most of their discrete desktop and notebook graphics controllers.

1. Locate and download the latest AMD graphics driver either by selecting the graphics controller or AMD processor with integrated graphics from the lists, or by searching for the specific controller or CPU from msinfo32 in the "Search All Products" drop down menu
   
2. Save and close any open applications, unplug the docking station or graphics adapter from the computer, and connect the original power supply (for laptop/notebook computers)
3. Right-click on the AMD Graphics Driver package and select "Run as Administrator" from the drop down menu
4. Allow the installer in the Windows User Account Control pop-up
5. Follow the on screen instructions to install the latest graphics driver
6. When complete, restart the computer before reconnecting the docking station or graphics adapter

With macOS 13.3.1 update we have started to see reports of the macOS window server crashing on Apple Silicon based computers (M1/M2 processors).  Either at login if a DisplayLink based docking station or USB graphics adapter is connected to the computer, when connecting the DisplayLink controlled display to the computer after login, or when launching the DisplayLink Manager App with the external display connected to the computer.

We have seen this behavior when the macOS's display persistence files have become corrupt, or include incompatible display configurations or settings.  The fix was to manually remove two display persistence ".plist" files, however now the DisplayLink Support Tool for macOS has an option to reset the display persistence to quickly resolve this behavior, the process is detailed below:

1. Unplug the DisplayLink controlled external display from the computer and log into the desktop
2. Download the DisplayLink Support Tool for macOS
3. Select the "DisplayLink Support Tool for macOS6.3.163-EXE.zip" from the downloads to extract the "DisplayLink Information.app" to the Downloads directory, a Finder window should open showing the extracted file
   
4. Double-click on the "DisplayLink Information.app" from the Downloads folder to start the tool
   
5. This will open a window for the DisplayLink Information tool, however we can ignore this for now. From the macOS top bar, next to "DisplayLink Information" select "Advanced" then "Reset screen layout"
   
6. You will be prompted for the account password to proceed, enter your password, then click the "OK" button
   
7. Next you will be prompted to reboot the computer, save and close any open applications then click on the "Reboot" button to proceed
   
8. After rebooting the computer, log into the desktop and reconnect the external display(s), you may need to rearrange the external displays through the Apple Menu > System Settings > Displays > Arrange settings panel

If you are experiencing this behavior, with the system logging in and back out, or logging out when connecting the DisplayLink based docking station or graphics adapter and the above does not help, please contact our support team via email at 'support@plugable.com' and we will be happy to help!

We have a produced a series of videos that introduce the general concepts of multi-monitor setups in Windows, how to change the way things behave, as well as how to solve common problems. Direct links to some of the videos our customers have found useful are:

Introduction to Multiple Displays in Windows --> LINK

Common Multi-Monitor Problem - Spatial Orientation --> LINK

Multi-Monitor Problem - Spatial Orientation Part Two --> LINK

How to make a Display the 'Main' Display in Windows 10 --> LINK

How to make a Display the 'Main' Display in Windows 11 --> LINK

Introduction to Display Scaling in Windows --> LINK

Quickly change display settings with the Windows+P Shortcut --> LINK

Troubleshooting A Disconnected Display with the UD-3900 --> LINK

How to Set Different Backgrounds on Multiple Monitors in Windows 10 --> LINK

Keyboard Shortcuts for Moving Applications on a Multiple Monitor Windows Setup --> LINK

How to Change Your Display's Refresh Rate in Windows --> LINK

How to Fix a “Phantom Display” on Windows --> LINK

Windows defaults to putting the computer to sleep when the lid is closed, even if there are external displays and devices connected, we can change this setting to enable closing the lid while using a docking station.

Recommended Setup

To ensure the computer can reliably function with the lid closed there are some requirements and recommendations:

1. The system should be powered: This can be from a USB Type-C Docking Station with host charging, or by connecting the laptop's original power source.
2. There should be at least one external display connected, this can be through a docking station, or directly to the computer.
3. There should be a keyboard and mouse connected, either through a docking station, USB Hub, or directly to the computer.

Windows 11 24H2 and Newer

1. Right-click on the Start menu and select Power Options from the context menu

   

2. Expand the Lid, power & sleep button controls sub-section

   

3. Under Plugged in select Do Nothing from the Closing the lid will make my PC  context menu

Windows 11 23H2 and Earlier

1. Right-click on the Start menu and select Power Options from the context menu

   

2. In the upper left corner of the settings window, in the search box, type "lid" then select Change what closing the lid does from the search results

   

3. Make sure the setting for When I close the lid under the Plugged In column is set to Do Nothing

   

4. Click the Save Changes button to apply the new settings.

Windows 10

1. Start by right-clicking on the Start button and select Power Options from the menu.
2. From the right side of the Power Options settings page, select the blue link for Additional power settings

   

3. From the choices present on the left-hand side of the Power Options window, please click on Choose what closing the lid does
4. Make sure the setting for When I close the lid under the Plugged In column is set to Do Nothing

   

5. Click the Save Changes button and restart the system (making sure that the laptop's power adapter is also connected) and test the behavior again.

Closing the lid should no longer put the computer into sleep mode when an external display and power source is connected, instead one of the external displays should now become the Primary display with the desktop icons instead of the laptop's built-in display.

When to open the lid?

The laptop lid may still need to be opened when performing any of the following:

• To power on the computer from a fully powered off state
• To log into the computer if logged out or if the computer is restarted with the lid closed
• To wake the computer from a deep sleep state (hibernation, or Windows hybrid sleep states)

If you have any questions please feel free to contact us at support@plugable.com and we'll be happy to help!

Unsure which version of macOS you have installed? Click on the ‘Apple’ icon in the menu bar on your desktop and select ‘About this Mac’. A new window will open and display the system’s macOS version.

'Legacy' DisplayLink Driver installation for macOS 10.15 Catalina

We also have a video that demonstrates this process here –> https://youtu.be/ixWKrd5SLKs

Before you begin

If have installed a previous version of the DisplayLink driver, please uninstall it and then reboot your system before proceeding.

1. Download the latest driver for macOS 10.15 Catalina from here -> Link

2. Navigate to your Downloads folder and double-click on the DisplayLink driver download

3, The disk image of the driver will mount, and automatically open the DisplayLink Installer main landing page.

4. Double-click on the ‘DisplayLink Software Installer.pkg’ file. The Install DisplayLink Driver page will open.

 *** Depending on your system’s security settings, the installer may not open and instead present you with a warning ***

Click on the ‘OK’ button to dismiss the warning, and then open ‘System Preferences’ (gear icon) and then open the ‘Security & Privacy’ application.

Click on the ‘Open Anyway’ button in the lower right-hand portion of the application window. Then click the ‘Open’ button within the next prompt.

5. Click the ‘Continue’ button shown within the installer’s ‘Introduction’ screen.

6. Click the ‘Agree’ button to accept the license.

7. Click the ‘Install’ button.

8. Click the ‘Continue Installation’ button. The system will need to be restarted when the installation is complete.

9. Enter your system password and click the ‘Install Software’ button.

10. After a few moments, the installer should report a successful installation.

11. The system should also prompt you to access the System Preferences to grant necessary permissions to the DisplayLink driver. Click on the ‘Open System Preferences’ button.

*** If the prompt described above did not appear automatically, manually open the ‘System Preferences’ application (gear icon in the macOS dock at the bottom of the screen) and select the ‘Security & Privacy’ application. Within the ‘Security & Privacy’ application click on the ‘Privacy’ tab. Scroll down in the list of items on the left-hand side of the application window and click to select ‘Screen Recording’. The proceed to the next step ***

12. The ‘Security & Privacy’ application should open and default to showing the ‘Privacy’ tab. On the right-hand side of the application window there should be a single entry entitled, ‘DisplayLinkUserAgent’. Click to place a checkmark next to this entry.

*** Important note – the contents of your screens (displays) are not being recorded. This setting just enables the DisplayLink driver to access the information generated by the system’s built-in graphics adapter to generate the image shown on the DisplayLink-connected displays. ***

13. After having placed a checkmark next to the ‘DisplayLinkUserAgent’ entry, click the ‘Quit Now’ button in the prompt that appears.

14. Close the ‘Security & Privacy’ application, and then restart your system. The DisplayLink device should start working after the restart is complete.

'Legacy' DisplayLink Driver installation for macOS 10.14 Mojave

** Before you begin **

If have installed a previous version of the DisplayLink driver, please uninstall it and then reboot your system before proceeding.

1. Download the latest driver for macOS 10.14 Mojave from here -> Link

2. Navigate to your Downloads folder and double-click on the DisplayLink driver download

3. The disk image of the driver will mount, and automatically open the DisplayLink Installer main landing page

4. Double-click on the ‘DisplayLink Software Installer.pkg’ file. The Install DisplayLink Driver page will open

5. Click ‘Continue’

6. Click the ‘Agree’ button

7. Click ‘Install’

8. Click ‘Continue Installation’ The system will need to be restarted when the installation is complete

9. Enter your system password and click the ‘Install Software’ button

10. There is a chance that the security settings in macOS may block the installation of the DisplayLink extension

11. If that occurs, click on the ‘Open Security Preferences’ button and click the ‘Allow’ button at the bottom of the window to grant permission for the extension to be loaded. ** Important note – this approval must be granted within 30 minutes of the driver installation or the process will not work. A fresh installation must be performed to reset this timer. **

There is also a chance that the warning message about the blocked System Extension will not appear, but macOS may still block the extension. After the driver installation completes, please double-check that the necessary approval was granted by clicking the ‘System Preferences’ icon (the gear) and then clicking on the ‘Security & Privacy’ icon. From the window that appears please ensure the DisplayLink driver is Approved by clicking the ‘Allow’ button.

12. Close the ‘Security and Privacy’ window. The DisplayLink installation should now complete

13. Click on the ‘Restart’ button to restart your system. The DisplayLink device should start working after the restart is complete.

'Legacy' DisplayLink Driver removal for macOS 10.14 Mojave and 10.15 Catalina

We also have a video that demonstrates this process here –> https://youtu.be/VRRLJf6D7vc

1. Click the Spotlight magnifying glass icon in the Apple Menu, and search for ‘DisplayLink Software Uninstaller’. Double-click on the result

2. The uninstall window will appear

3. Click the ‘Uninstall’ button

4. Enter your account password and click ‘OK’

5. After a few moments the process will complete. Click the ‘Restart’ button to complete the removal process.

Background Information

Docking stations and video adapters based on DisplayLink USB video technology are in essence a 'virtual' graphics adapter that relies on the host computer's CPU and internal physical graphics processing unit (GPU) to generate the information shown on the attached displays.

In rare instances, Windows applications that use a technology known as OpenGL to draw the image shown on the display will attempt to direct OpenGL related tasks to the DisplayLink-based product's virtual graphics adapter, and not to the 'real' or 'physical' GPU within the host computer.  

Since the DisplayLink device is not a physical GPU that supports OpenGL, this can sometimes cause applications that make use of OpenGL (such as Google Earth, SketchUp or AutoCAD) to not work as expected or result in various types of error messages. 

The true root cause of this behavior can vary, and ultimately lies outside of the DisplayLink based product or its associated DisplayLink driver. In some cases the root cause lies within the Windows driver for the host system's physical GPU and in rarer cases within the Windows operating system itself.  

Possible Workarounds

In some instances updating either the driver for the host system's internal GPU or updating Windows itself can help, however that is unfortunately not always the case.

If updating those components does not help, in most cases there are two possible workarounds:

1. The first is to configure Windows to have the ‘Main’ display set to a display directly connected to the host system's built-in internal GPU, whether that is an internal laptop display or another external display connected to one of the system's built-in video outputs.

A guide to configuring the 'Main' display within Windows 10 is here -> LINK

A guide to configuring the 'Main' display within Windows 11 is here --> LINK

2. If the first option does not prove a suitable workaround, the second option is to boot the host  system without the DisplayLink-based device connected, launching the affected application, and then connecting the DisplayLink-based device to the computer. This process can sometimes help direct the OpenGL requests to the host computer's internal physical GPU. 

When upgrading the DisplayLink Manager Graphics Connectivity App to new version within a macOS system, the update process will cause the older version of the App to quit. As a result, any monitors connected to a DisplayLink-based USB video adapter or docking station will stop working.

The solution is to manually start the new version of the DisplayLink Manager Graphics Connectivity App by double-clicking on the App's icon within the macOS 'Applications' folder within the macOS Finder. This will restart the DisplayLink Manager Graphics Connectivity App, which in turn will enable any monitors connected to a DisplayLink-based USB video adapter or docking station to start working again. 

This article intends to provide a list of Plugable products that utilize DisplayLink technology that we currently recommend for use with macOS Mojave 10.14 and newer versions of the macOS operating system. 

DisplayLink docks that are recommended with USB 3.0 Type-A and USB 3.0 Type-C connection to laptop:

Plugable UD-3900 Dual Display Universal Docking Station (UD-3900)

Plugable USB 3.0 Dual Monitor Horizontal Docking Station (UD-3900H)

Plugable Dual HDMI USB Universal Docking Station For Windows (UD-3900Z)

Plugable Dual 4K Display HDMI or DisplayPort Universal Docking Station (UD-6950Z)

Plugable UD-6950 USB 3.0 Dual DisplayPort 4K Docking Station (UD-6950)

Plugable UD-6950H USB 3.0 Dual 4K Display Horizontal Docking Station with DisplayPort and HDMI (UD-6950H)

DisplayLink docks that are recommended that support USB-C power delivery to the laptop:

Plugable USB-C 5-Display Docking Station with HDMI 2.1 and 140W charging (UD-7400PD)

Plugable Thunderbolt 4 Docking Station for 4K Quad Monitors, 100W Laptop Charging (TBT-6950PD)

Plugable USB-C Docking Station, Dual 4K Monitors, 100W Laptop Charging (UD-6950PDH)

Plugable USB-C Triple 4K Display Docking Station with 100W Laptop Charging - Horizontal (UD-6950PDZ)

Plugable USB-C Triple HDMI Display Docking Station with 100W Laptop Charging - Horizontal (UD-3900PDZ)

Plugable USB-C Triple 4K Display Docking Station with 100W Laptop Charging - Vertical (UD-ULTC4K)

Plugable USB-C Triple HDMI Display Docking Station with 100W Laptop Charging - Vertical (UD-ULTCDL)

Plugable USB-C Triple Monitor Docking Station with 3x HDMI Ports, 100W Laptop Charging (UD-3900PDH)

Plugable USB-C Docking Station for 4 Monitor Setup, 96W Laptop Charging (UD-3900C4)

Plugable USB-C Dual HDMI Docking Station, 100W Pass Through Charging (USBC-6950PDZ)

DisplayLink adapters that are recommended:

Plugable Dual Monitor USB-C to HDMI Adapter, 4K 60Hz (USBC-6950M)

Plugable USB-C Quad 4K HDMI Graphics Adapter With up to 100W USB-C PD Pass-through Charging (USBC-7400H4)

Can Silicon Motion and DisplayLink-Based Docking Stations and Graphics Adapters Work Together?

Yes, Silicon Motion and DisplayLink-based products can work together and be used at the same time on the same computer. This requires that the software drivers for both types of products are installed on the host system.

How Silicon Motion and DisplayLink Products Work Together

Both Silicon Motion and DisplayLink utilize USB graphics technology that can coexist on a single operating system. To ensure proper functionality, users must download and install the specific drivers associated with each respective chipset.

While Windows limits are typically performance-based recommendations, the actual ceiling of adding external monitors is much higher.

Plugable recommends up to 8 external 4K displays via DisplayLink for productivity workloads, but more is theoretically possible for high-end computers.

With Silicon Motion Plugable recommends up to 4 displays using Silicon Motion based adapters. macOS often enforces a hard limit on the number of addressable displays.

Applicable To

USBC-7400H4

USBC-6950M

USBC-6950UE

USBC-6950U

UGA-4KHDMI

UGA-HDMI-2S

UGA-HDMI-S

USBC-768H4

USBC-MSTH2

UGA-DP-S

USB3-3900DHE

USB-VGA-165

UGA-4KDP

UGA-2KHDMI

UGA-165

USBC-MSTH3

UGA-3000

The DisplayLink software is not developed by Plugable. The DisplayLink software is developed by a separate company called DisplayLink --> https://www.synaptics.com/products/displaylink-graphics (which is itself part of the Synaptics Corporation).  

DisplayLink has a 'Corporate Deployment' section within their online knowledge base that speaks to all of the corporate deployment options available for the software --> https://support.displaylink.com/knowledgebase/topics/92322-corporate-deployment  

Plugable does not support any of the 'Corporate' installation methods of the DisplayLink software.  

Should you require assistance with a corporate deployment method of the DisplayLink software, we would suggest contacting DisplayLink directly for assistance --> https://support.displaylink.com/knowledgebase 

No. Plugable USB video adapters and docking stations that use DisplayLink technology do not support HDCP-protected video playback through DisplayLink-connected displays.

What You May Experience

Protected video may show a black screen, play audio without video, display an error, or play at a lower-than-expected resolution.

Examples include:

• HDCP-protected Blu-ray content
• Some protected content from Netflix, Hulu, Prime Video, the Apple TV app, Disney+, YouTube TV, and other streaming services

Availability and behaviour can vary by service, application, browser, operating system, and content.

Workaround and Alternative Options

Connect the display directly to a native video output on the computer, such as HDMI, DisplayPort, or a USB-C port that supports Alt Mode or Thunderbolt. Do not route the display connection through a DisplayLink video output.

On macOS, protected content may remain unavailable on all screens while a DisplayLink-connected display is active. Disconnect all displays using DisplayLink before attempting playback. 

If protected-content playback is an important requirement, consider a docking station that uses a native USB-C Alt Mode or Thunderbolt video connection. Display support depends on the computer's capabilities.

Non-protected video files and ordinary desktop applications should continue to work on DisplayLink-connected displays.

Applies To

• TBT-6950PD, UD-3900, UD-3900C, UD-3900C4, UD-3900H, UD-3900PDH, UD-3900PDZ, UD-3900Z, UD-6950, UD-6950H, UD-6950PDH, UD-6950PDZ, UD-6950Z, UD-7400PD, UD-ULTC4K, UD-ULTCDL, UGA-165, UGA-2KHDMI, UGA-3000, UGA-4KDP, UGA-4KHDMI, USB-VGA-165, USB3-3900DHE, USB3-6950-DP, USB3-6950-HDMI, USBC-6950-DP, USBC-6950-HDMI, USBC-6950M, USBC-6950PDZ, USBC-6950U, USBC-6950UE, USBC-7400H4
• All future DisplayLink products

Before you begin

Unsure which version of macOS you have installed on your Mac? Click on the ‘Apple’ icon within the menu bar located at the top of your macOS desktop and select ‘About this Mac’. A new window will open and display the host system’s macOS version.

Please note, this guide describes the DisplayLink Manager installation process using macOS 26 Tahoe. The process is very similar when using macOS 15 Sequoia, and macOS 14 Sonoma, however there may be slight differences due to the specific operating system version in use. 

Guided Video Demonstration

For those who prefer, we have a video demonstration of the installation procedure available (an embedded link is below). The video demonstrates the process on macOS 26 Tahoe, however the process is virtually identical in macOS 15 Sequoia and macOS 14 Sonoma.

For those who prefer, a detailed text-based description of the installation process (including screenshots) is available within the sections below.

How to install the DisplayLink Manager application

IMPORTANT NOTE - The screenshots in this article (and the demonstration video) were produced using macOS 26 Tahoe however the process and appearance is virtually identical in macOS 15 Sequoia and macOS 14 Sonoma

1. Download the correct version of the DisplayLink Manager Application for your version of macOS from here → https://plugable.com/pages/displaylink

2.  Double-click on the file you downloaded to start the application installer:

3. From within the ‘Introduction’ section of the application installer,  click on the ‘Continue’ button to start the installation process:

4. After having read the license information from within the ‘License’ section of the application installer, click on the ‘Continue’ button

5. Click on the ‘Agree’ button in order to agree to the software license agreement.

6. From within the ‘Installation Type’ section of the application installer, click on the ‘Install’ button:

7. When prompted, please enter your system password and click on the ‘Install Software’ button to start the installation. The installation process will begin:

8. The application installer will notify you when the installation process has been completed. Please click on the ‘Close’ button in order to close the application installer.

IMPORTANT NOTE - If the installation process does not complete successfully, please see this knowledge base article --> https://kb.plugable.com/question/1807081  for a list of potential causes and possible solutions.

9. Once the initial installation process has been completed, you should see a request from the DisplayLink Manager Application to allow the application to display notifications, when necessary.  Click on the ‘Options’ button within the request and click the ‘Allow’ option

Note, we have more information in regard to notifications while using DisplayLink on macOS here → https://kb.plugable.com/question/3137440

10. You should also see two Login Item notifications from macOS:

Both notifications are intended to inform that the DisplayLink Manager Application can run in the background once you have logged in to the host Mac.

These notifications are informational only, and can be freely dismissed.

IMPORTANT NOTE - The DisplayLink Manager Application must be running in order for any monitors powered by DisplayLink technology to function.

11. Starting with DisplayLink Manager version 16.0 and later versions, a DisplayLink Installation Wizard will now appear and the DisplayLink Installation Wizard is composed of three steps.

The first step of the Wizard is to ensure that the required Background Activity permissions are in place (as described in step #10) and this step should be completed automatically.

12. The second step of the Wizard is to connect your DisplayLink device to the host Mac. On portable Mac computers (such as laptops), depending on how macOS is configured you may see a prompt to allow the accessory to connect.  If prompted, please click ‘Allow’.  

13. Once the DisplayLink device is connected, the third step of the Wizard is to grant permission to the DisplayLink Manager application to record your screen within the macOS System Settings. Click the ‘Open System Settings’ button at the top of the DisplayLink Installation Wizard in order to open the System Settings application.

IMPORTANT NOTE - The DisplayLink Manager Application does NOT in fact record, store or transmit any information. This permission must be granted in order for the DisplayLink Application to access the information it needs in order to generate the image shown on the DisplayLink-connected displays.

14. After clicking on the ‘Open System Settings’ button, the macOS System Settings application will open, with the ‘Screen & System Audio Recording’ section opened by default:

15. Click the toggle switch next to the ‘DisplayLink Manager’ entry in order to grant the required permission. When doing so, you will be prompted to enter your password. Enter your password and click the ‘Modify Settings’ button to continue:

16. You will be prompted to ‘Quit and Reopen’ the DisplayLink Manager application in order for the change to take effect. Please do so:

17. As a result of quitting the DisplayLink Manager Application, the DisplayLink Installation Wizard will disappear momentarily.  The DisplayLink Installation Wizard will reappear once the DisplayLink Manager Application has been reopened.

18. You will receive a notification from macOS to allow the DisplayLink Manager application to access your screen and audio. Please click the ‘Allow’ button to continue:

19. When the DisplayLink Installation Wizard reappears, it should indicate that setup has completed successfully.  Click the ‘Finish’ button to close the DisplayLink Installation Wizard.

20. Once the DisplayLink Installation Wizard has been completed, the macOS System Settings application window as shown in step #14 may still be visible. If still visible, please close the application window.

21. Once the System Settings application has been closed, a macOS prompt to open the System Settings application window may be visible.  If visible, the prompt can be dismissed by clicking on the ‘Deny’ button.  No changes will in fact be made, as the necessary changes will have already been completed as of step #15.

IMPORTANT NOTE - In macOS 26 Tahoe, macOS 15 Sequoia and macOS 14 Sonoma, whenever the DisplayLink Manager Application is running and a DisplayLink device is connected to your computer you will see a notification within the Apple Menu bar that the DisplayLink Manager Application is capturing your screen.  This is both normal and expected behavior.

22. Now that the DisplayLink Manager Application is installed and running, a DisplayLink Manager icon will appear within the Apple menu bar at the top of your screen. Click on the DisplayLink Manager icon in order to open the application status window.

23. The first tab of the DisplayLink Manager Application status window is the ‘Displays’ tab. As the name implies, all of the DisplayLink driven displays that are connected to your Mac will be displayed here, similar to the example below:

IMPORTANT NOTE - only displays driven by DisplayLink technology will be shown here. Displays driven by other methods (such as USB Type-C or Thunderbolt) will NOT be displayed.

Next to each display is a small toggle switch that will allow you to selectively toggle a display off or on as desired.

Below each display name will be two sliders that allow you to control the brightness or contrast of that display, according to your preference.

If multiple displays with identical names are present, you can differentiate between each display by hovering the mouse pointer over each display name.  When doing so, a red identification box will appear on-screen within the selected display.

24. The second tab of the DisplayLink Manager Application status window is the ‘Settings’ tab.

The items listed will vary depending upon which version of the DisplayLink Manager Application that is installed and the type of processor within the host Mac (Intel processor or Apple processor).

An example of the ‘Settings’ tab from DisplayLink Manager version 16.1 running on a Mac with an Apple processor is provided below:

The following list describes the features present within the ‘Settings’ tab while using DisplayLink Manager version 16.1 with a Mac with an Apple processor:

Automatic app startup
As the name suggests, toggling on the ‘Automatic app startup’ option allows the DisplayLink Manager Application to start automatically each time you log on to your Mac. This option should be enabled by default during a standard installation. If not already enabled, we recommend doing so in the interest of efficiency.

Additional HiDPI modes
In brief, HiDPI mode is a feature of macOS that can make images within a display appear sharper. In some cases, the host Mac will not enable HiDPI mode for the displays connected to a DisplayLink-based product.

Clicking the toggle to enable the ‘Additional HiDPI modes’ option will create new resolution choices for the DisplayLink-connected displays within the ‘Displays’ section of the macOS ‘System Settings’ application that may help improve the sharpness of the image.

Synaptics (the creators of DisplayLink technology) have more information on this feature here → https://support.displaylink.com/knowledgebase/articles/1993915-displaylink-manager-app-experimental-hidpi-modes

System sleep in display-closed mode
Mac laptops running macOS 26 Tahoe, macOS 15 Sequoia, macOS 14 Sonoma can be used in one of two ways when used in conjunction with a DisplayLink-based product.

The first way is with the laptop lid open, with the laptop's built-in internal display enabled.  

The second way is with the laptop lid closed, with the laptop's built-in internal display disabled.  This is known as closed display mode or 'clamshell' mode.

In order to enter closed display mode while connected to a DisplayLink-based product, the host Mac must have an external power source connected and an external keyboard and mouse connected.

Clicking the toggle to enable the 'System sleep in display-closed mode’ option changes this behavior, in that closing the laptop lid will cause the host Mac to go to sleep.

This feature is of course optional, and its use is a matter of personal preference.

Enhance video conferencing apps
The ‘Enhance video conferencing apps’ option, which is enabled by default, helps ensure that screen sharing or content controls while using the Microsoft Teams application appear as expected.

DisplayLink has more information about this feature here → https://support.displaylink.com/knowledgebase/articles/2022489-how-to-fix-missing-screen-sharing-controls-in-micr 

Summary

Yes. Many Plugable products that use DisplayLink USB graphics technology support ChromeOS and can provide additional external displays without requiring a separate driver installation.

However, ChromeOS compatibility varies by Plugable product. Always confirm that your specific Plugable product lists ChromeOS as a supported operating system before use.

For Plugable products that support ChromeOS, Plugable recommends using ChromeOS version 100 or later with the latest Stable channel updates installed.

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations and USB graphics adapters that list ChromeOS as a supported operating system
• Chromebooks, Chromeboxes, and other supported computers running ChromeOS

Not every Plugable product that contains DisplayLink technology necessarily supports ChromeOS. Refer to the individual Plugable product page for operating system compatibility.

Answer

DisplayLink support is built directly into ChromeOS, so a separate DisplayLink driver does not normally need to be downloaded or installed.

Synaptics, the developer of DisplayLink technology, has included DisplayLink support in ChromeOS since ChromeOS release R51. Plugable currently recommends ChromeOS version 100 or later for Plugable DisplayLink products that support ChromeOS.

To use a supported Plugable DisplayLink product with ChromeOS:

1. Update the Chromebook or ChromeOS device to the latest available Stable channel version of ChromeOS.
2. Connect the Plugable dock or graphics adapter directly to a compatible USB port on the ChromeOS device.
3. Connect the external display or displays to the Plugable product.
4. Open the ChromeOS display settings to arrange, mirror, or extend the connected displays as desired.

No separate DisplayLink software installation is required.

Performance Considerations

DisplayLink USB graphics uses processing resources from the host computer to generate and transmit the image shown on the connected displays. As a result, DisplayLink performance can vary depending on the Chromebook's processor, memory, USB connection, number of connected displays, display resolution, and the applications being used.

Synaptics currently recommends the following minimum system characteristics for Chromebook systems using DisplayLink:

• A 2GHz or faster processor with NEON or SSE2 instruction support
• 4GB of RAM or more when using two or more DisplayLink-connected displays
• A USB 3.0 connection

Systems with more capable processors and additional memory may provide better performance, particularly when using multiple high-resolution displays or playing video.

Intel, AMD, and ARM-Based Chromebooks

DisplayLink support in ChromeOS is not limited to Intel or AMD processors.

Current DisplayLink requirements support processors with either SSE2 or NEON instruction support. SSE2 is commonly associated with x86 processors from Intel and AMD, while NEON is used by ARM-based processors.

As a result, processor architecture alone does not determine DisplayLink compatibility. Performance depends on the capabilities of the specific Chromebook and the workload being performed.

For the best experience, confirm that the Chromebook meets the recommended DisplayLink system requirements and that the specific Plugable product supports ChromeOS.

ChromeOS Version and Updates

Plugable recommends ChromeOS version 100 or later with the latest available updates installed for Plugable DisplayLink products that support ChromeOS.

Plugable recommends using the ChromeOS Stable release channel for normal use and troubleshooting. Beta, Developer, and Canary builds are prerelease versions of ChromeOS and may introduce behavior that has not been validated with Plugable products.

Because the DisplayLink driver is built into ChromeOS, DisplayLink driver updates and fixes are distributed through ChromeOS updates. There is no separate DisplayLink driver package for a user to manually install on ChromeOS.

Important Notes

Product Compatibility Varies

DisplayLink technology being present in a Plugable product does not by itself guarantee that the complete product supports ChromeOS.

Some docks combine DisplayLink with other technologies and features that may have additional operating system or host requirements.

Always check the Compatibility or Supported Operating Systems section of the individual Plugable product page before purchasing or connecting the product to a Chromebook.

Display Performance

Higher resolutions, multiple external displays, video playback, and graphics-intensive applications require more host processing resources.

A configuration that works well for normal office applications may provide lower performance with demanding video or graphics workloads.

No Manual DisplayLink Driver Installation

ChromeOS includes its DisplayLink support within the operating system. Unlike Windows or macOS, there is no DisplayLink software package that needs to be manually downloaded and installed.

PlugDebug Is Not Available for ChromeOS

Plugable's PlugDebug diagnostic utility is available for Windows, macOS, and supported Linux distributions, but it cannot be run on ChromeOS.

When requesting support for a ChromeOS device, please provide the exact Chromebook or ChromeOS device model and ChromeOS version.

For instructions, see:

How to Identify Your Chromebook Model and ChromeOS Version

Need Assistance?

If a supported Plugable DisplayLink product is not working as expected with your Chromebook or ChromeOS device, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

• Your Plugable product model
• The exact Chromebook or ChromeOS device model
• Your ChromeOS version
• The number, make, and model of connected displays
• The display resolution you are attempting to use
• A description of the issue you are experiencing

Modern operating systems support adjusting the color of the image shown within external displays in order to make the image more pleasing depending upon the time of the day.

In Windows 10 and Windows 11, this feature is known as ‘Night Light’ → https://support.microsoft.com/en-us/windows/set-your-display-for-night-time-in-windows-18fe903a-e0a1-8326-4c68-fd23d7aaf136

In ChromeOS, this feature is also known as ‘Night Light’ → https://support.google.com/chromebook/answer/9145848?hl=en

In macOS, this feature is known as ‘Night Shift’ → https://support.apple.com/en-us/HT207513

When using a DisplayLink-based product based on the DL-3xxx, DL-5xxx, or DL-6xxx chipsets, as of today the level of support for color adjustment is as follows:

*** More information about this feature is available here → https://support.displaylink.com/knowledgebase/articles/1990237-displaylink-manager-app-f-lux-support-option

Summary

The DisplayLink Manager application is required to enable DisplayLink-based video outputs on compatible Plugable docking stations and USB graphics adapters when used with macOS.

In most cases, DisplayLink Manager installs without issue. However, the macOS installer may occasionally report an “Unexpected Error” and fail to complete the installation.

Common causes include insufficient installation permissions, macOS privacy restrictions, an installation file being accessed from an unsuitable location, an incomplete or damaged download, or remnants of a previous DisplayLink installation.

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations used with macOS
• Plugable DisplayLink-based USB graphics adapters used with macOS
• macOS 10.15 and later when using the DisplayLink Manager application

macOS 10.14 Mojave uses the legacy DisplayLink software and is not covered by these instructions.

Answer

If DisplayLink Manager fails to install with an “Unexpected Error,” first confirm that you are using the correct DisplayLink Manager version for your version of macOS and that your Mac account has permission to install software.

If the error continues, check the macOS Files & Folders privacy permissions for the Installer application, confirm that the installation package is stored locally on the Mac, and remove any existing DisplayLink software before attempting the installation again.

Before You Begin

Before troubleshooting the installation:

1. Confirm your version of macOS by selecting Apple menu > About This Mac.
2. Download the correct DisplayLink Manager version for your version of macOS from Plugable's DisplayLink driver page:

DisplayLink Drivers and Software

3. Make sure the downloaded installation package is completely downloaded before opening it.
4. If the Mac is owned or managed by a company, school, or other organization, confirm that you are authorized to install software.

1. Confirm That Your Account Can Install Software

DisplayLink Manager installation requires authorization to make changes to macOS.

During installation, macOS may prompt you to enter an administrator password or authenticate using Touch ID.

If your Mac is managed by an employer, school, or other organization, security policies or Mobile Device Management (MDM) settings may prevent software installation even if you can log in normally.

If you do not have permission to install software, contact your organization's IT administrator for assistance.

2. Run the Installation Package From Local Storage

For troubleshooting, make sure the DisplayLink Manager installation package is stored on the Mac's local storage before opening it.

Avoid running the installer directly from:

• A network drive
• An external storage device
• Microsoft OneDrive
• Dropbox
• Google Drive
• Another cloud-synchronized or remotely mounted location

If necessary, download a new copy from Plugable's DisplayLink driver page and save it to the Mac's Downloads folder.

Also confirm that the Mac has sufficient available storage space for the installation.

3. Check the macOS Files & Folders Permission

The macOS Installer application may need permission to access the folder containing the DisplayLink Manager installation package.

For example, if the installation package is located in the Downloads or Desktop folder, macOS may display a prompt asking whether the Installer application should be allowed to access that folder.

If prompted, click Allow.

If permission was previously denied, macOS may remember that choice and may not display the same prompt again.

To check the permission manually:

1. Open Apple menu > System Settings.
2. Select Privacy & Security.
3. Scroll down and select Files & Folders.
4. Look for Installer in the list.
5. If Installer is listed, expand the entry if necessary and enable access to the folder containing the DisplayLink Manager installation package, such as Downloads Folder or Desktop Folder.
6. Close System Settings.
7. Close the DisplayLink installer if it is still open.
8. Open the DisplayLink Manager installation package again and retry the installation.

If Installer is not listed under Files & Folders, continue to the next section.

4. Download a New Copy of DisplayLink Manager

An incomplete or damaged installation package can also prevent the installation from completing.

Delete the existing DisplayLink Manager installation package, then download a new copy appropriate for your version of macOS from Plugable's DisplayLink driver page:

DisplayLink Drivers and Software

Once the download is complete, open the new installation package and attempt the installation again.

5. Remove Existing DisplayLink Software

If DisplayLink Manager or an older DisplayLink driver was previously installed on the Mac, remaining software components may interfere with a new installation.

Plugable recommends completely removing the existing DisplayLink installation before reinstalling.

For instructions, see:

How to Uninstall DisplayLink Manager Software on macOS

When troubleshooting installation problems, the DisplayLink Installation Cleaner can be used to remove DisplayLink Manager and associated components.

After the cleanup is complete:

1. Restart the Mac.
2. Download the correct DisplayLink Manager version for your version of macOS.
3. Run the installation again.

6. Complete the DisplayLink Manager Setup

Once DisplayLink Manager installs successfully, additional macOS permissions are required before DisplayLink-connected displays can operate.

Follow Plugable's DisplayLink Manager installation instructions for your version of macOS. Installation guidance is available from Plugable's DisplayLink Drivers and Software page.

This may include allowing DisplayLink Manager to run in the background and granting the required Screen & System Audio Recording or Screen Recording permission.

Note: Screen Recording permission is required for DisplayLink video functionality after installation. It is separate from the Files & Folders permission used by the macOS Installer during the installation process.

Need Assistance?

If DisplayLink Manager still reports an “Unexpected Error” after completing the steps above, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

• Your Plugable product model
• Your Mac model
• Your macOS version
• The DisplayLink Manager version you are attempting to install
• A screenshot of the “Unexpected Error” message
• Whether the Mac is personally owned or managed by an organization
• The output from Plugable's diagnostic tool, PlugDebug

Summary

Most DisplayLink-connected monitors can be rotated in macOS, but the correct setting location depends on your macOS version, DisplayLink Manager version, and Mac processor type.

For current macOS installations using newer versions of DisplayLink Manager, display rotation is normally adjusted in System Settings > Displays. Older Apple silicon systems using earlier DisplayLink Manager versions may instead need to use the rotation controls inside the DisplayLink Manager application.

This article explains which method to use and how to rotate a DisplayLink-connected monitor to Standard, 90°, 180°, or 270°.

Applicable To

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• Mac computers using DisplayLink Manager for macOS
• macOS 11 Big Sur and newer, with notes for unsupported older configurations

This article applies to displays connected through DisplayLink technology. It does not apply to displays connected directly through native USB-C DisplayPort Alternate Mode, Thunderbolt, USB4, HDMI, or DisplayPort video outputs unless the product also uses DisplayLink for that specific display output.

Answer

For most current setups, rotate the DisplayLink-connected display from the macOS Displays settings:

1. Open the Apple menu.
2. Select System Settings.
3. Select Displays.
4. Select the external display you want to rotate.
5. Use the Rotation or Rotate menu to choose the correct orientation.
6. Select Confirm if macOS asks you to confirm the change.

If the Rotation option does not appear, review the compatibility table and troubleshooting section below.

Which Method Should I Use?

For best results, Plugable recommends using the latest DisplayLink Manager version available for your version of macOS. Current DisplayLink Manager installers are available here: Plugable DisplayLink Driver and Software Downloads.

Before You Begin

Confirm the following before changing display rotation:

• The DisplayLink Manager application is installed.
• DisplayLink Manager is running. A DisplayLink Manager icon should appear in the Apple menu bar when the application is active.
• The Plugable DisplayLink-based product is connected to the Mac.
• The monitor is connected to a DisplayLink-controlled video output on the Plugable product.
• The monitor itself can safely be used in the physical orientation you plan to use.

If you are using macOS 14 Sonoma, macOS 15 Sequoia, macOS 26 Tahoe, or newer, DisplayLink Manager also needs the required macOS screen recording permission in order for DisplayLink-connected displays to work.

Rotate a Display in macOS 13 Ventura or Newer

Use these steps for current macOS versions, including macOS 13 Ventura, macOS 14 Sonoma, macOS 15 Sequoia, and macOS 26 Tahoe, when using DisplayLink Manager 1.12.0 or newer.

1. Open the Apple menu in the upper-left corner of the screen.
2. Select System Settings.

3. In the System Settings sidebar, select Displays. You may need to scroll down to find it.
4. Select the display you want to rotate from the display thumbnails at the top of the window.
5. Find the Rotation or Rotate option.
6. Open the rotation menu and select the desired orientation, such as Standard, 90°, 180°, or 270°.

7. If macOS displays a confirmation prompt, select Confirm to keep the new rotation setting.

Rotate a Display in macOS 11 Big Sur or macOS 12 Monterey on an Intel-based Mac

On Intel-based Macs running macOS 11 Big Sur or macOS 12 Monterey, DisplayLink-connected displays can be rotated from the built-in macOS display settings.

1. Open the Apple menu.
2. Select System Preferences.

3. Select Displays.
4. Select Display Settings....

Select Display Settings to configure each connected display.

5. Select the external display you want to rotate.
6. Use the Rotation or Rotate menu to choose the desired orientation.

Select the display, then choose the desired rotation.

7. If macOS asks you to confirm the change, select Confirm.

Legacy Apple Silicon Method: DisplayLink Manager 1.6 through 1.11.x

Use this section only if you are using an Apple silicon Mac on macOS 12 Monterey with DisplayLink Manager 1.6 through 1.11.x. On these older configurations, rotation is adjusted from within the DisplayLink Manager application instead of the macOS Displays settings.

For current macOS versions and current DisplayLink Manager versions, use the macOS System Settings > Displays method above instead.

1. Click the DisplayLink Manager icon in the Apple menu bar to open the DisplayLink Manager window.

2. Find the display you want to rotate in the Display rotation and toggle section.
3. If multiple displays are listed with the same name, move your pointer over a display name. A red border should appear on the matching physical display.
4. Open the rotation menu next to the display and choose the desired orientation.

If You Do Not See the Rotation Option

If the Rotation or Rotate option does not appear, check the following:

• Make sure the monitor is connected to a DisplayLink-controlled video output on the Plugable product.
• Make sure DisplayLink Manager is installed and running.
• Make sure the DisplayLink-connected display is active and not toggled off in DisplayLink Manager.
• Install the latest DisplayLink Manager version available for your version of macOS.
• Confirm that the monitor is not being mirrored in a way that prevents separate rotation controls from appearing.
• Confirm that the display supports rotation in macOS. Apple notes that the Rotation option appears only when a compatible external display is connected.
• If you are using an Apple silicon Mac running macOS 11 Big Sur, DisplayLink display rotation is not supported in that configuration.
• If you are using macOS 10.15 Catalina, DisplayLink display rotation is not supported in that configuration.

Troubleshooting

1. The DisplayLink display is not listed in System Settings

If the DisplayLink-connected display does not appear in System Settings > Displays, first confirm that DisplayLink Manager is installed, running, and allowed in macOS privacy settings.

For full setup steps, see Plugable’s current DisplayLink Manager installation guide: DisplayLink Manager App Installation Instructions for macOS.

2. The display rotates, but the image looks sideways or upside down

Try a different rotation value. The correct selection depends on how the physical monitor is positioned. For example, a monitor physically rotated clockwise may need a different setting than a monitor physically rotated counterclockwise.

3. The display goes blank after choosing a rotation value

Wait for the macOS confirmation timer to expire, or choose Revert if the confirmation prompt is visible. Then try another rotation value or return the display to Standard.

4. The rotation option only appears for some displays

Rotation support can depend on the display, macOS version, DisplayLink Manager version, and how the display is connected. Confirm that the display is connected through a DisplayLink-controlled output and that your macOS and DisplayLink Manager versions support rotation.

Important Notes

• The rotation setting location has changed across DisplayLink Manager versions. Current versions normally use macOS System Settings > Displays.
• The older DisplayLink Manager rotation controls are included here only for legacy Apple silicon configurations using DisplayLink Manager 1.6 through 1.11.x.
• macOS may ask you to confirm a rotation change. If you do not confirm, macOS may automatically revert to the previous setting.
• Some displays may not expose a rotation control in macOS.
• Always confirm that your physical monitor stand or mount supports portrait or rotated operation before rotating the monitor.

Need Assistance?

If you are unable to rotate a DisplayLink-connected display after following the steps above, contact Plugable Support at support@plugable.com. Please include the Plugable product model, your Mac model, your macOS version, your DisplayLink Manager version, and a brief description of how each monitor is connected.

For the fastest assistance, please also include the output from Plugable’s PlugDebug diagnostic utility: PlugDebug.

Summary

When using a Plugable DisplayLink-based docking station or USB graphics adapter with macOS, you may see a notification in the Apple menu bar stating that DisplayLink Manager is capturing your screen.

This message is normal and expected when the DisplayLink Manager application is running and a DisplayLink-based device is connected. DisplayLink Manager requires macOS screen recording permission in order to generate the image shown on monitors connected through DisplayLink technology.

DisplayLink Manager is not recording, storing, or sending your screen contents to Plugable. DisplayLink also states that DisplayLink Manager does not send data or pixels back to DisplayLink or Synaptics.

Applicable To

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• Mac computers running macOS 14 Sonoma or newer, including macOS 15 Sequoia and macOS 26 Tahoe
• Systems with the DisplayLink Manager application installed and running

This article applies to products that use DisplayLink technology. It does not apply to Plugable products that use only native USB-C DisplayPort Alternate Mode, Thunderbolt, USB4, or HDMI/DisplayPort video without DisplayLink.

Answer

This notification appears because macOS is informing you that DisplayLink Manager is actively using screen capture access.

DisplayLink-based products use an indirect display technology. Instead of the external monitor being driven directly by the Mac’s built-in graphics output, DisplayLink Manager helps create the display image in software and sends the required display data over USB to the DisplayLink hardware.

Because DisplayLink Manager must access the screen image in order to create the output shown on the DisplayLink-connected monitors, macOS requires the application to be granted screen recording permission. Starting with macOS 14 Sonoma and newer versions of macOS, Apple also shows a visible menu bar notification when this type of screen access is active.

As long as your DisplayLink-connected monitors are working normally, no corrective action is required.

Why This Happens

macOS includes privacy controls for applications that can access screen contents. Apple uses this permission category for screen sharing, screen recording, and applications that need screen access to provide a display-related function.

DisplayLink Manager uses this access so it can generate the pixels shown on monitors connected to a DisplayLink-based dock or adapter. This is required for DisplayLink video output on macOS.

The wording used by macOS can sound concerning because it uses terms such as capturing or recording. In this context, the permission allows DisplayLink Manager to access the screen information needed to render the external display. It does not mean that DisplayLink Manager is saving a video recording of your screen.

What the Notification Means

The notification means that DisplayLink Manager is currently running and using the macOS screen access permission needed for DisplayLink video output.

This is expected when:

• The DisplayLink Manager application is open or running in the background
• A Plugable DisplayLink-based dock or adapter is connected to the Mac
• One or more monitors are connected through the DisplayLink-based product

The notification may disappear if DisplayLink Manager is quit, if the DisplayLink device is disconnected, or if the required permission is removed. However, DisplayLink-connected monitors will not work correctly if DisplayLink Manager is not running or does not have the required permission.

Do I Need to Change Any Settings?

No. If your DisplayLink-connected monitors are working normally, this notification can be ignored.

Plugable recommends leaving the required permission enabled if you want to continue using monitors connected through a DisplayLink-based product.

If you want to confirm that the required permission is enabled:

1. Open the Apple menu.
2. Select System Settings.
3. Select Privacy & Security.
4. Select Screen & System Audio Recording.
   On some older macOS versions, this may appear as Screen Recording.
5. Confirm that DisplayLink Manager is enabled.
6. If macOS asks you to quit and reopen DisplayLink Manager, follow the prompt so the change can take effect.

Can I Disable the Notification?

The notification is generated by macOS as part of Apple’s privacy and security design. There is not a Plugable setting that removes this notification while DisplayLink Manager is actively using the required screen access permission.

If you quit DisplayLink Manager, disconnect the DisplayLink-based product, or remove the screen recording permission, the notification may stop. However, monitors connected through DisplayLink technology will also stop working or may not work correctly.

If Your DisplayLink Displays Are Not Working

If you see the notification but your DisplayLink-connected monitors are not working as expected, check the following:

1. Make sure the latest DisplayLink Manager application for macOS is installed. The latest DisplayLink Manager installer is available here: Plugable DisplayLink Driver and Software Downloads.
2. Make sure DisplayLink Manager is running. A DisplayLink Manager icon should appear in the Apple menu bar when the application is active.
3. Confirm that DisplayLink Manager is enabled under System Settings > Privacy & Security > Screen & System Audio Recording.
4. If prompted by macOS, choose the option to quit and reopen DisplayLink Manager after changing the permission.
5. Disconnect the Plugable DisplayLink device from the Mac, reconnect it, and allow any macOS accessory approval prompt that appears.
6. Restart the Mac if the displays do not begin working after the permission has been granted.

For full installation steps, please see Plugable’s DisplayLink Manager installation guide: DisplayLink Manager App Installation Instructions for macOS.

Important Notes

• The message is expected behavior in macOS 14 Sonoma and newer when DisplayLink Manager is running and a DisplayLink device is connected.
• The required permission is a macOS privacy requirement, not a defect with the Plugable dock or adapter.
• DisplayLink Manager must be running for DisplayLink-connected monitors to function on macOS.
• Removing the screen recording permission may cause DisplayLink-connected monitors to stop working.
• DisplayLink states that DisplayLink Manager does not record or store screen content, and does not send data or pixels back to DisplayLink or Synaptics.

Need Assistance?

If your DisplayLink-connected monitors are not working after confirming the items above, contact Plugable Support at support@plugable.com. Please include the Plugable product model, your Mac model, your macOS version, the DisplayLink Manager version installed, and a brief description of what appears in the DisplayLink Manager application.

For the fastest assistance, please also include the output from Plugable’s PlugDebug diagnostic utility: PlugDebug.

Note, for those who prefer a visual answer to this question, Plugable has produced a video that demonstrates how to fix this issue:

For those that prefer a written explanation and solution, please continue reading.

Summary

When a Windows desktop computer is used with a Plugable DisplayLink-based docking station or USB graphics adapter, and no monitor is connected directly to the desktop computer’s built-in video output, Windows may list an extra display in Display Settings even though no monitor is physically connected to that output. Plugable refers to this as a phantom display.

If Windows sets the phantom display as the main display, desktop icons, application windows, or the Windows sign-in screen may appear to be missing because Windows is placing them on a display that is not actually present.

This can usually be resolved by moving the Windows Display Settings window onto a visible monitor, setting one of the Plugable-connected displays as the main display, and setting the phantom display to Disconnect this display.

Applicable To

• Plugable DisplayLink-based USB docking stations
• Plugable DisplayLink-based USB graphics adapters
• Windows desktop computers
• Setups where the only connected monitors are attached through the Plugable DisplayLink device
• Setups where desktop icons, application windows, or the Windows sign-in screen appear missing, off-screen, or on the wrong display

Answer

This behavior is usually caused by a phantom display being configured as the Windows main display.

In Windows Display Settings, each detected display appears as a numbered box. In this scenario, one numbered display may represent a video output on the desktop computer’s built-in graphics adapter even though no monitor is actually connected to that output. If Windows treats that non-visible display as the main display, Windows may place desktop icons, the sign-in screen, and new application windows there.

To resolve the issue:

• Bring the Windows Display Settings window onto a visible monitor.
• Use Identify to determine which display number does not appear on any physical monitor.
• Select a real display connected through the Plugable DisplayLink device and enable Make this my main display.
• Select the phantom display and change it to Disconnect this display.

Why This Happens

DisplayLink-based docking stations and USB graphics adapters transmit display data over a USB data connection. This is different from connecting a monitor directly to the computer’s built-in HDMI, DisplayPort, DVI, or VGA output.

Because the monitors connected through DisplayLink are not connected directly to the desktop computer’s built-in graphics output, some Windows desktop systems may still show an additional display associated with the system’s native graphics hardware. This display may remain listed even though no physical monitor is connected to it.

If Windows makes this phantom display the main display, desktop icons and application windows can become difficult to find because they are being opened on a display that is not visible.

Before You Begin

The steps below are written for Windows 11 and assume the following example setup:

• The desktop computer is already running Windows.
• No monitors are connected directly to the video outputs built in to the desktop computer.
• A Plugable DisplayLink-based docking station or USB graphics adapter is connected to the computer.
• Two external displays are connected to the Plugable DisplayLink device.
• At least one Plugable-connected display is visible enough to use the Windows taskbar, mouse, and keyboard.

The same general process applies if your display numbers or number of connected displays are different from the example shown below.

Optional Video Reference

Before starting, you may want to review Plugable’s short video on using Windows keyboard shortcuts to move application windows between displays. This is useful if the Display Settings window opens on the phantom display and is not visible.

How to move application windows using keyboard shortcuts in Windows

How To Fix the Phantom Display in Windows

1) Right-click on an empty area of the Windows desktop on one of the visible displays connected to the Plugable DisplayLink device.

2) Select Display settings.

In many cases, the Display Settings window will open on the phantom display and will not be visible. However, you may see the Display Settings icon on the Windows taskbar.

3) Select the Display Settings icon on the Windows taskbar to make sure the Display Settings window is active.

4) Press Windows key + Shift + Right Arrow to move the active window to another display.

If the Display Settings window does not appear, press the shortcut again. You can also try Windows key + Shift + Left Arrow. Repeat until the Display Settings window appears on a visible display.

5) At the top of Display Settings, look for the numbered display boxes. Select Identify.

Windows will briefly show a number on each physical display. Make a note of the display number that does not appear on any physical monitor. That number represents the phantom display.

For example, if Windows shows display numbers 1, 2, and 3, but only numbers 2 and 3 appear on your real monitors, display 1 is the phantom display.

6) Select one of the real displays connected through the Plugable DisplayLink device. In this example, display 2 is selected.

7) Under Multiple displays, place a check mark next to Make this my main display.

This sets the selected real display as the Windows main display. The Windows sign-in screen, desktop icons, and newly opened application windows should now appear on that display.

8) Next, select the numbered display box for the phantom display. In this example, display 1 is the phantom display.

9) Under Multiple displays, open the display mode drop-down menu and select Disconnect this display.

After this change, the phantom display will be disabled. One of the real displays connected to the Plugable DisplayLink device should now be configured as the main display, and desktop icons and application windows should appear on the visible displays.

Important Notes

• Even after the phantom display is disconnected, its display number may still appear in Windows Display Settings. This is expected. The disconnected display may appear smaller than the active displays.
• Windows does not provide a way to completely hide the disconnected display from the Display Settings page.
• Do not disconnect a display number if that number appears on a real physical monitor that you want to use.
• When possible, Plugable recommends connecting at least one monitor directly to a desktop computer’s native graphics output, such as HDMI, DisplayPort, DVI, or VGA, and using DisplayLink-connected displays as additional monitors.
• If none of the displays connected to the Plugable DisplayLink device are working, or if the Plugable device is not detected at all, follow Plugable’s DisplayLink driver clean installation process instead: My DisplayLink-based USB Docking Station or USB Video Adapter Is Not Working As Expected with a Windows computer.

Troubleshooting

Display Settings does not appear on a visible monitor

Select the Display Settings icon in the Windows taskbar, then press Windows key + Shift + Right Arrow or Windows key + Shift + Left Arrow. Repeat the shortcut until the Display Settings window appears on one of the visible displays.

I cannot tell which display is the phantom display

Use the Identify button in Windows Display Settings. The display number that does not appear on any physical monitor is the phantom display. If every display number appears on a real monitor, do not disconnect any of them.

The display changes do not save

When Windows asks you to confirm the display change, make sure to keep or confirm the new setting before the timer expires. If the setting does not save, restart the computer and repeat the steps.

Displays are still not working correctly after disconnecting the phantom display

Try the following:

1. Restart the computer.
2. Disconnect and reconnect the Plugable DisplayLink device.
3. If possible, connect one monitor directly to the desktop computer’s native graphics output and confirm that Windows is using that display as the main display.
4. Perform a clean installation of the DisplayLink driver using Plugable’s DisplayLink troubleshooting guide.
5. If the issue continues, collect logs with Plugable’s PlugDebug diagnostic utility and contact Plugable Support.

Need Assistance?

If the issue continues after following the steps above, contact Plugable Support at support@plugable.com. Please include the Plugable product model, your Windows version, the desktop computer make and model, the number of connected displays, how each display is connected, and whether any monitor is connected directly to the desktop computer’s built-in video output.

For the fastest assistance, please also include the output from Plugable’s PlugDebug diagnostic utility: PlugDebug.

Summary

The most common reason a Plugable DisplayLink-based docking station or USB graphics adapter stops outputting video after a Mac is updated or restarted is that the DisplayLink Manager application is not running, did not reopen after login, or no longer has the required macOS screen recording permission.

DisplayLink Manager is the software component that allows DisplayLink-based video outputs to work in macOS. If the application is not running, or if macOS is blocking the required permission, the displays connected through the DisplayLink-based device may remain blank, not appear in macOS Display Settings, or stop working until the application and permissions are restored.

Applicable To

• Plugable DisplayLink-based docking stations used with macOS
• Plugable DisplayLink-based USB graphics adapters used with macOS
• Mac systems where DisplayLink-connected displays stopped working after a macOS update, restart, shutdown, or login
• Mac systems where the DisplayLink Manager icon is missing from the macOS menu bar

This article applies only to products that use DisplayLink technology. It does not apply to Plugable USB-C DisplayPort Alternate Mode adapters, Thunderbolt-only docks, or MST-based adapters that do not use DisplayLink Manager.

Answer

First, confirm whether DisplayLink Manager is running. When DisplayLink Manager is running, its icon should appear in the macOS menu bar at the top of the screen.

If the DisplayLink Manager icon is not present, the application is not currently running. Open DisplayLink Manager from the Applications folder, then enable the setting that allows DisplayLink Manager to start automatically after you log in.

How To Reopen DisplayLink Manager

1. Open Finder.
2. Select Applications in the left sidebar.
3. Locate DisplayLink Manager.
4. Double-click DisplayLink Manager to open it.
5. Confirm that the DisplayLink Manager icon appears in the macOS menu bar.

After DisplayLink Manager opens, the displays connected through the Plugable DisplayLink-based device should begin working again if the only issue was that the application was not running.

Enable DisplayLink Manager to Start Automatically

After a restart or macOS update, DisplayLink-connected displays may not work until DisplayLink Manager starts. We recommend enabling DisplayLink Manager to start automatically after login.

1. Click the DisplayLink Manager icon in the macOS menu bar.
2. Open the Settings tab.
3. Enable Automatic app startup.

Older versions of DisplayLink Manager may show this setting as Launch automatically after login instead.

Confirm macOS Screen Recording Permission

If DisplayLink Manager is running but the displays are still not working, confirm that macOS is allowing DisplayLink Manager to access the screen. macOS requires this permission in order for DisplayLink Manager to generate the image shown on DisplayLink-connected displays.

Important: DisplayLink Manager does not record, store, or send your screen content to DisplayLink or Synaptics. The macOS permission is required because DisplayLink technology needs access to the screen image in order to send display data over USB to the connected monitor.

1. Open the Apple menu and select System Settings.
2. Select Privacy & Security.
3. Select Screen & System Audio Recording.
4. Find DisplayLink Manager in the list and enable the toggle.
5. Enter your Mac password or use Touch ID if prompted.
6. When macOS asks, select Quit & Reopen so the permission change can take effect.

On some older macOS versions, this setting may be listed as Screen Recording instead of Screen & System Audio Recording.

Allow the Accessory to Connect When Prompted

On Mac laptops with Apple silicon, macOS may ask for permission before allowing a newly connected USB or Thunderbolt accessory to pass data. If this prompt appears when connecting your Plugable DisplayLink-based product, select Allow.

If Don’t Allow is selected, the device may receive power but data may not pass through correctly. This can prevent DisplayLink Manager from detecting the Plugable device and connected displays.

Why This Happens

Plugable DisplayLink-based products use a USB data connection to drive external displays. On macOS, this requires the DisplayLink Manager application to be installed, open, and granted the required macOS permissions.

After a macOS update, restart, shutdown, or login, one or more of the following may occur:

• DisplayLink Manager may not reopen automatically.
• The DisplayLink Manager icon may be missing from the macOS menu bar.
• macOS screen recording permission may need to be confirmed again.
• An Apple silicon Mac laptop may require the Plugable device to be allowed as a USB accessory.
• A DisplayLink software update or clean reinstall may be needed if the system was recently updated.

Important Notes

• DisplayLink Manager must be running for displays connected through DisplayLink technology to work in macOS.
• Enabling Automatic app startup starts DisplayLink Manager after you log in. It does not necessarily make DisplayLink-connected displays available before login.
• If you need DisplayLink-connected displays available at the macOS login screen, DisplayLink provides a separate Login Screen Extension. DisplayLink notes that DisplayLink screens will not display the login screen when FileVault is enabled, even when the Login Screen Extension is installed.
• macOS may show a menu bar notification indicating that DisplayLink Manager is capturing the screen while a DisplayLink display is active. This is expected behavior in current macOS versions.

Troubleshooting

1. The DisplayLink Manager icon is missing from the menu bar

Open DisplayLink Manager manually from the Applications folder. Then enable Automatic app startup in the DisplayLink Manager Settings tab so the application starts after you log in.

2. DisplayLink Manager is running, but the displays are still blank

Check the macOS screen recording permission under System Settings > Privacy & Security > Screen & System Audio Recording. Make sure DisplayLink Manager is enabled, then select Quit & Reopen if macOS prompts for it.

3. The Mac asks whether to allow the accessory to connect

Select Allow. If the prompt was missed or Don’t Allow was selected, disconnect the Plugable device, reconnect it, and allow the accessory when prompted. You can also review the Allow accessories to connect setting under System Settings > Privacy & Security.

4. The displays stopped after a macOS update and these steps did not resolve the issue

Recommend perform a clean reinstall of DisplayLink Manager. Plugable's current DisplayLink Manager installation guide is available here: DisplayLink Manager App Installation Instructions for macOS 26 Tahoe, macOS 15 Sequoia, and macOS 14 Sonoma.

5. A message says the screens have been stopped by the system

On macOS 15 Sequoia and later, DisplayLink notes that macOS may stop DisplayLink screen streaming if available disk space falls below a required threshold. Free additional disk space, restart the Mac, and try the DisplayLink-connected displays again.

6. The Plugable device is not detected by DisplayLink Manager

Disconnect all cables from the Plugable device, reconnect power if the device uses an external power adapter, and then reconnect the USB cable to the Mac. If possible, test a different USB port, a different USB cable, and another computer. Also confirm that macOS has allowed the accessory to connect and that the DisplayLink Manager App is running.

Need Assistance?

If the displays still do not work after completing the steps above, Plugable Support will be happy to help.

Please contact us at support@plugable.com

It's not uncommon for users to notice a certain level of heat generation from electronics and by extension, Plugable products during operation. In this knowledge base article, we'll explore the reasons behind this heat generation and why it is considered a normal experience within reasonable limits.

Electronics, by their nature, generate heat during operation. This is primarily a result of the electrical current flowing through various components, such as integrated circuits, transistors, and other electronic elements. As Plugable products are designed to efficiently process and transfer data (among other functionality), some level of heat generation is inherent.

Factors Influencing Heat Generation:

1. Power Consumption: The power consumption of a device directly influences the amount of heat it generates. Higher power usage, especially during data transfer or charging processes, can lead to increased heat.
2. Enclosure Design: The design of the product's enclosure and its ability to dissipate heat play a crucial role. Adequate ventilation and heat sinks are often incorporated to manage and disperse generated heat effectively. This is evident in our TBT3-UDZ and TBT4-UDZ designs. The metal case in these docks are designed to function as a heatsink with thermal pads placed throughout the enclosure. This allows heat dissipation from inside to the outside, but will also make it feel as if the device is “too hot”. 
3. Ambient Temperature: The external environment may also play a role. Higher ambient temperatures can contribute to increased perceived heat from the product. This means that summer temperatures may increase the heat generation of not just Plugable products, but many other electronic devices.

Normal Heat Levels: While it is normal for electronic devices to generate heat, Plugable products are engineered to operate within safe temperature ranges. We conduct rigorous testing to ensure that the heat generated during normal operation falls within industry-standard safety parameters. While not all products are or need to be UL certified, we try to go by UL guidelines for thermal readings. The UL threshold is 77C/170.6F, and we aim for around 71C/160F.

Tips for Users:

1. Ventilation: Ensure that Plugable products have sufficient ventilation around them. Avoid placing them in enclosed spaces where heat dissipation may be impeded.
2. Usage Patterns: Intensive tasks such as high-speed data transfer or charging multiple devices simultaneously may result in increased heat generation. This is generally normal but may be more noticeable in such scenarios.
3. Accessories: A number of our devices will allow for the connection of USB accessories and as such, these will require power. If too many “power-hungry” devices are connected, this will cause the device to run much hotter than expected. Be sure to keep in mind the power limits of your dock/device.

In conclusion, experiencing heat from Plugable products is a normal aspect of their operation. Users can rest assured that we prioritize the safety and efficiency of our devices. By understanding the factors influencing heat generation and following simple usage guidelines, users can make the most of their Plugable products while ensuring a reliable and efficient user experience.

A productive work space for technology professionals has much to benefit from adding multiple screens for increased productivity by as much as 42%. Our blog post “Can Multiple Monitors Really Double Productivity” highlights a few different ways to add additional monitors through our USB graphics adapters, docking stations, and USB hubs.

Most docking stations are limited to adding 1, 2, and even up to 4 displays depending on the model. But what if you want to add more monitors without replacing your docking station? Whether you have a Plugable dock – or a dock from Dell, HP, Belkin, Anker, or virtually any other brand – adding USB graphics adapters lets you enable more displays than your current setup would otherwise be capable of.

Both DisplayLink and Silicon Motion with its unique graphics transport technology enables users to add additional monitors through using USB and sparse use of your computer's resources. All you need is an open USB port on your existing docking station or hub and a USB graphics adapter from Plugable.

No matter what type of connection your monitor uses, Plugable has several different types of USB Graphics Adapters that feature HDMI, DisplayPort, DVI, VGA – even combinations with multiple outputs and port types. Our USB Graphics Adapters are available in options for a single display, dual display, and even quad display.

For Windows and Mac users the Plugable USBC-6950U using DisplayLink technology can do precisely this by enabling you to easily add two 4K HDMI or DisplayPort monitors to your computer. The adapter has the flexibility to connect either to a USB 3.0 or USB-C connector. At this time Plugable recommends only a maximum of 8 external monitors on Windows if using 4K resolution monitors with DisplayLink, and a maximum of 4 external monitors with Silicon Motion. This setup is ideal for adding screens for day traders, spreadsheets, and productivity use cases.

On macOS there are limitations to how many external monitors can be supported natively, and this can vary depending on the model of the Mac. With the popular base M1 / M2 / M3* MacBooks, those laptops are limited to only support a single external monitor. Our Plugable USBC-768H4 Quad-HDMI adapter is a great option to exceed this limitation to add up to four 1080p monitors for MacBooks that would otherwise only support a single monitor for a total of 5 monitors.

Curious to see this expandability in action? As a proof of concept Plugable has tested using as many as 14 external monitors using a combination of our DisplayLink graphics adapters and our USB hubs, featured on our YouTube channel.

 If you have any questions on setting up a multi-monitor setup, please contact Plugable Support Plugable support.

* Note that the base M3 can output to 2 external displays when the built in screen is disabled or the lid is closed (clamshell mode). This feature is planned for a later date on the base M3 MacBook Pro and is currently available on the M3 MacBook Air. 

* Additional SKUs: USBC-6950M, USB3-3900DHE, USBC-6950UE, UGA-HDMI-S, USBC-768H4, UGA-HDMI-2S, UGA-DP-S, USB-VGA-165, UGA-4KHDMI, UGA-4KDP, UGA-3000, UGA-2KHDMI, UGA-165

If you have installed your DisplayLink-enabled docking station or graphics adapter and downloaded the DisplayLink software, but see that no displays are working properly, you may need to enable “Screen Recording”. In this guide, we will go over a short list of steps to enable this permission, and get your DisplayLink device up and running!

As of macOS Catalina (version 10.15), DisplayLink drivers that are installed require that the “Screen Recording” permission be granted by the user. While this permission, when used in conjunction with DisplayLink is not recording in a traditional sense, it does allow DisplayLink to access the pixels it needs to render images (mirrored or extended). It then sends these pixels over USB from the computer to the display connected to your DisplayLink connected device.

Note: It does not capture or send any data.

During the installation process for the DisplayLink drivers, you will be requested to allow “Screen Recording” for DisplayLink. Additionally, you may see a notification within the DisplayLink application and when a new device is connected. However, we understand sometimes these may get lost in a sea of information and other notifications.

How do I know if the Screen Recording permission hasn’t been set? Reference the image below to check in your “Privacy & Security” settings

If you have not enabled “Screen Recording”, please follow these few instructions to enable it.

1. Click on the Apple icon (defaults to the top left corner of your screen) and select “System Preferences
2. Navigate to and click “Security & Privacy”
3. In this window, select “Privacy”
4. A list will be presented, scroll until you find “Screen Recording” and click on it
5. Displayed on the bottom left, there is a lock icon, click on this to make changes
6. If prompted, login using your computer credentials to make changes
7. Check the box next to DisplayLink Manager
8. You will be promoted to “Quit & Reopen”, click this button
9. Click on the lock icon once more to save your changes

Note: Some of these steps may vary slightly based on your macOS version

You should now be able to see your displays on your docking station or adapter. If you have completed the above steps successfully and still do not see your displays, please be sure to reach out to our support team at support@plugable.com.

Summary

If an external monitor is not detected after your Mac wakes from sleep or starts up, the monitor's automatic input-source detection feature may be contributing to the issue.

Setting the monitor to use the specific HDMI, DisplayPort, or USB-C input connected to your Plugable product can help the monitor reconnect more reliably.

Applicable To

This article applies to:

• Macs using external displays
• Plugable docking stations and video adapters used with macOS
• Monitors that support automatic input-source detection

Depending on the monitor manufacturer, automatic input detection may be called Auto Select, Auto Detect, Auto Source, Input Auto Switch, or something similar.

Answer

Some monitors automatically scan their available video inputs when waking from sleep or when a connected computer starts.

In certain configurations, this additional input-switching behavior can interfere with the timing of display detection, resulting in the monitor remaining blank or not appearing in macOS Display Settings.

If this occurs, disable automatic input-source detection and manually select the input connected to the Plugable product.

Disable Automatic Input-Source Detection

The exact steps vary by monitor model, but the setting is typically available through the monitor's built-in on-screen display (OSD).

1. Open the monitor's on-screen display menu.
2. Locate the Input, Source, or similar settings menu.
3. Disable any automatic input-selection option, such as:
   • Auto Select
   • Auto Detect
   • Auto Source
   • Input Auto Switch
4. Manually select the input being used with the Plugable product, such as:
   • HDMI
   • DisplayPort
   • USB-C
5. Put the Mac to sleep and wake it again to test the connection.

For instructions specific to your monitor, refer to the monitor manufacturer's documentation.

If the Display Is Still Not Detected

If disabling automatic input detection does not resolve the issue:

1. Open Apple menu > System Settings > Displays.
2. Press and hold the Option key. The Detect Displays button should appear.
3. Select Detect Displays.

You can also try:

• Disconnecting and reconnecting the Plugable product
• Power cycling the monitor
• Trying a different video cable
• Restarting the Mac
• Installing the latest available macOS updates

DisplayLink Products and the macOS Login Screen

If you are using a Plugable DisplayLink-based docking station or USB graphics adapter and the displays work after you log in but remain blank before login, this is a different issue.

DisplayLink Manager normally begins running after you log in to macOS. DisplayLink provides an optional Login Screen Extension for users who need DisplayLink-connected displays available before login.

For more information, see:

Why Don't My DisplayLink-Connected Screens Show Anything Before Logging Into macOS?

Need Assistance?

If your external displays are still not detected after completing the steps above, please contact Plugable Support at support@plugable.com.

• When contacting support, please include:
• Your Plugable product model
• Your Mac model
• Your macOS version
• The make and model of each connected monitor
• How each monitor is connected to the Plugable product
• A description of what happens after waking or starting the Mac
• The output from Plugable's diagnostic tool, PlugDebug

Follow the steps below to completely remove DisplayLink Manager and its associated components from your Mac.

Step 1: Disconnect the Dock or Adapter

Disconnect the DisplayLink-based dock or adapter from your Mac.

Before continuing, save any open work and close DisplayLink Manager. You can quit the application by selecting the DisplayLink Manager icon in the macOS menu bar, navigating to the Settings tab, and choosing Quit.

Step 2: Run the DisplayLink Installation Cleaner

Synaptics provides the DisplayLink Installation Cleaner for macOS to remove DisplayLink Manager, associated components, user preferences, and the Login Screen Extension. Full Instructions available here. 

1. Download the DisplayLink Installation Cleaner for macOS.
2. Open and run the Cleaner.
3. Select the items you want to remove.
4. Click Clean.
5. Enter your macOS administrator password when prompted.

All cleanup options are selected by default. The Reset Screen Layout option will also reset macOS display settings, including display arrangement and rotation. Leave this option selected when troubleshooting display configuration issues, or deselect it if you want to preserve your current display layout.

If DisplayLink Manager Will Not Close

If you cannot quit DisplayLink Manager normally:

1. Open Finder.
2. Select Go > Utilities > Activity Monitor.
3. Search for DisplayLink Manager.
4. Select the process and click the Stop button at the top of Activity Monitor.
5. Choose Force Quit, if prompted.

Then run the DisplayLink Installation Cleaner again.

Deleting DisplayLink Manager from the Applications folder may not remove all associated components, including the Login Screen Extension. For a complete removal, we recommend using the DisplayLink Installation Cleaner.

Step 3: Restart Your Mac

After the cleanup is complete, restart your Mac by selecting Apple menu > Restart.

DisplayLink Manager should now be completely removed. Should you have any trouble completing these steps, please contact Plugable Support at support@plugable.com.

Applicable To

• DisplayLink Manager Application
• macOS 

In brief, the prompt is part of a new security feature Apple introduced with macOS 15 Sequoia.

For reference, an example of the prompt is included below:

In order to use your DisplayLink-based product, you must click the ‘Allow For One Month’ button within the prompt you received.  In one month’s time, you will be prompted to renew this authorization for an additional month. This renewal process will continue each month thereafter.

To expand further, when initially installed the DisplayLink Manager Application must be granted ‘Screen Recording’ permission within the macOS Security & Privacy settings in order to function.

*** An important note, the DisplayLink Manager Application does NOT in fact record or store any information. This permission must be granted in order for the DisplayLink Application to access the information it needs in order to generate the image shown on the DisplayLink driven displays. ***

With the release of macOS 15 Sequoia, Apple has instituted a new policy whereby this permission must initially be allowed for one month and then be renewed on a monthly basis. If the permission is not renewed, then the DisplayLink device will not function.

Overview

Modern computers are limited in regard to the number of external displays that can be directly connected or “natively supported.” These limitations are determined by the capabilities of the host computer’s internal graphics processing unit (GPU) and the number of physical video connection ports available.

Products available from Plugable that use technology from DisplayLink or Silicon Motion provide the ability to connect multiple external displays to a computer via USB once the required software driver is installed, which allows one to workaround the host computer’s internal limitations.

Such technologies are typically referred to as ‘indirect display’ technologies because the USB connection means that the displays are NOT connected directly to the host computer’s GPU.

The total number of external displays possible via an indirect display technology can vary due to a number of factors:

- The technical specifications of the host system

- Limitations of the host operating system in regard to how many displays can be addressed

- Limitations of the USB subsystem, in regard to how many devices can be physically connected and recognized by the host system

- The capabilities of the specific indirect display technology in use

Speaking in general, with most modern computers at least four external displays can be added via USB graphics technologies and in some instances up to eight displays are possible. Note these are in addition to the number of native external displays your system supports, which ranges from 1-4 on most modern systems.

Number of indirect displays supported by Plugable

A. Total includes any displays added via Apple’s Sidecar feature → https://support.apple.com/en-us/102597

B. Performance is dependent upon the specifications of the host system. Chromebooks using lower-spec CPUs and GPUs may support fewer displays

*** Please see important information within the ‘Performance and Technical Limitations section below ***
 

Performance and Technical Limitations

When using products based an indirect technology, the number of external displays that can be added to a computer (and are supported by Plugable) will vary depending upon which operating system is in use and certain technical limitations:

Host resource use

An indirect display device is in essence a ‘virtual’ GPU that relies on the capabilities of the host computer’s CPU and physical internal GPU in order to generate the image shown on the attached displays.

With each indirectly connected display added to the host, more CPU and GPU resources are required. As more displays are added, the amount of resource use may impact both the performance and stability of the computer and displays. It should be noted that the resource load will vary depending on the type of content being shown within the indirectly connected displays. For example, static content (such as an office application) will require less resources as compared to dynamic content (such as a video).

USB device connection limit

Modern computers have practical limits in regard to the maximum number of devices that can be connected to the host’s USB subsystem.  

These limits will prevent USB devices from being recognized by the host when a certain number of devices are connected.

The total number of USB devices that can be connected can vary from system to system, as well as the specification of the USB protocol in use.

Speaking in general, host computers that supported only USB 2.0 could recognize and use a large number of external USB devices.

Host computers that support USB 3.0 or later versions of the specification have limitations in regard to the number of external devices that can be connected to ensure the level of performance does not drop below a certain threshold. 

To solve this issue, click on the "View" option within the KeePassXC application's menu bar and enable the "Allow Screen Capture" option. Enabling this setting will allow the application to be visible on your DisplayLink-connected displays.

Why the KeePassXC Window Disappears

In order for DisplayLink-based video adapters or docking stations to work with modern versions of macOS, the DisplayLink Manager application must be granted "Screen Recording" permission. The KeePassXC application hides its window when it believes the screen is being recorded. Even though the DisplayLink software only uses this permission to generate the image for connected displays and does not record, store, or send any information externally, the application hides the window as a precaution.

Applicable To

• Plugable DisplayLink-based video adapters and docking stations

Summary

Many modern displays support refresh rates higher than 60Hz. In some cases, the desired refresh rate may need to be selected manually in Windows 11. The resolutions and refresh rates available depend on the capabilities of the display, computer, graphics hardware, docking station or adapter, and the connection between them.

Applicable To

Windows 11 computers using built-in or external displays, including displays connected through compatible Plugable docking stations, video adapters, and cables.

Setting the Display Refresh Rate in Windows 11

1. Right-click on the desktop and select Display Settings from the drop-down menu

2. Scroll down to the Related settings subsection and select Advanced display

3. At the top of the Advanced display window, select the display you want to configure from the drop-down menu.

4. From the Choose a refresh rate drop-down menu select the desired refresh rate

If the Desired Refresh Rate Is Not Listed

If the desired refresh rate is not available, confirm that the display, computer or graphics hardware, docking station or adapter, and video cable all support the desired resolution and refresh rate combination.

Some devices may support a higher refresh rate only at a lower display resolution. Check the specifications for each component in the display connection to confirm the supported resolution and refresh rate combinations.

Refresh Rate Limitations

Windows 11 may display an asterisk (*) next to certain refresh rates in Settings > System > Display > Advanced display. The asterisk indicates that the selected refresh rate is not supported at the display's current resolution. Selecting one of these refresh rates will cause Windows to change the display resolution in order to achieve the selected refresh rate.

In the example below, the display supports 3840 × 2160 (4K UHD) at 60Hz and 2560 × 1440 (1440p) at 120Hz through the connected hardware. After selecting “120 Hz*”, Windows changes the display resolution from 3840 × 2160 to 2560 × 1440 so that the higher refresh rate can be used. Because the display is now operating at a lower resolution, the image may appear less sharp than when using the display's native 4K resolution. After selecting a lower refresh rate, Windows may retain the reduced display resolution. If the original resolution is not restored automatically, return to Settings > System > Display and manually select the desired resolution.

Dynamic Refresh Rate

Windows 11 also supports Dynamic Refresh Rate (DRR) on compatible hardware. When enabled, Windows can automatically adjust the display refresh rate based on what you are doing to provide smoother motion when needed while helping reduce power consumption at other times.

DRR requires a display that supports Variable Refresh Rate (VRR) and a refresh rate of at least 120Hz. If supported by the computer and display, DRR can be enabled or disabled under Settings > System > Display > Advanced display.

Need Assistance?

If the desired refresh rate is still unavailable after following the steps above, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

• The Plugable product model
• Your computer model
• Your display model
• The resolution and refresh rate you are trying to use
• How the display is connected to the Plugable product
• The output from Plugable's diagnostic tool, PlugDebug

DisplayLink enabled external displays require the DisplayLink Manager App to be running before the displays will light up. This application starts only after logging into the desktop. But fear not, there is an extension to enable the displays before logging in to the system.

DisplayLink Login Screen Extension

The login screen extension can be installed after logging into the desktop, directly from the DisplayLink Manager App.

1. Expand the DisplayLink Manager by clicking on its icon in the menu bar at the top of your screen
   
2. In the app, click the download button in the DisplayLink Manager to download the Login Screen Extension.
   
3. The Login Screen Extension will download. Open the downloaded file to begin the installation.
4. Follow on-screen instructions and grant any necessary permissions.
5. After installation, your connected displays should show video output once your Mac is rebooted, even before login.

If you have any questions please feel free to contact us at support@plugable.com and we'll be happy to help!

Summary

When a Plugable DisplayLink-based docking station or USB graphics adapter is active on macOS, notifications may not appear because macOS treats DisplayLink Manager as sharing or capturing the screen.

To allow notifications while using DisplayLink, enable notifications while mirroring or sharing the display in macOS Notifications settings.

Applicable To

This article applies to:

• Plugable DisplayLink-based docking stations
• Plugable DisplayLink-based USB graphics adapters
• Macs using the DisplayLink Manager application
• macOS 12 Monterey and later

Answer

DisplayLink Manager requires permission to access the screen information needed to generate the image shown on DisplayLink-connected displays.

Because macOS treats this activity similarly to screen sharing, macOS may suppress notifications while DisplayLink-connected displays are active.

To allow notifications:

1. Open Apple menu > System Settings.
2. Select Notifications in the sidebar.
3. Locate the setting for notifications when mirroring or sharing the display.
4. Set this option to Allow Notifications.

Depending on your version of macOS, the wording or appearance of this setting may vary slightly.

After changing the setting, notifications from applications that are otherwise allowed to send notifications should appear normally while your DisplayLink-connected displays are active.

Important Note

Allowing notifications while mirroring or sharing the display also allows notifications to appear during other screen-sharing or mirroring activities.

This may cause private notification content to appear while presenting, sharing your screen during a meeting, or mirroring your Mac to another display.

DisplayLink Manager does not record or store the contents of your screen. macOS requires screen access so DisplayLink Manager can generate the image displayed on DisplayLink-connected monitors.

Need Assistance?

If notifications are still not appearing after enabling this setting, confirm that notifications are also enabled for the individual application under System Settings > Notifications.

If you continue to experience issues while using a Plugable DisplayLink-based product, please contact Plugable Support at support@plugable.com.

When contacting support, please include:

• Your Plugable product model
• Your Mac model
• Your macOS version
• Your DisplayLink Manager version

Applicable To

Plugable DisplayLink-based docking stations and USB graphics adapters.

Summary

Various factors, such as connection quality, USB bandwidth, driver versions, and display settings, can cause displays connected via DisplayLink to run slowly or perform sub-optimally. The details below highlight some common causes of poor performance, but this is not an exhaustive list. If you are experiencing sub-optimal performance, try the following steps as a starting point.

Instructions

1. Ensure you are using the original detachable host cable that came with your Plugable product, as third-party cables may lack the necessary speed or quality.
2. Plug your DisplayLink device into a USB port on your computer that matches its required speed. The required USB speed for each Plugable product is listed as the Version and Link Rate in the Connection to Host section of the product specifications on Plugable’s website.
3. Ensure that you have installed the latest DisplayLink driver from Plugable's website. While Windows Update can provide DisplayLink drivers automatically, they may not always be the latest version. If your driver was installed some time ago, a newer version that includes performance optimizations may be available.
   • The latest DisplayLink drivers are available on the Downloads tab of the product page for your Plugable product, or at www.plugable.com/displaylink 
   • It’s recommended that you update the DisplayLink driver through a “clean” reinstallation. This involves removing the existing driver from the system using a specialized cleaning tool from Synaptics before installing the updated driver.
     • Windows Clean Reinstallation steps can be found here.
     • macOS Clean Reinstallation steps can be found here.
4. Adjust your connected display refresh rates to a maximum of 60Hz within your operating system's display settings (via Display Settings in Windows or System Settings in macOS) to avoid reduced performance.
   
   While other refresh rates may appear as options in your operating system, selecting them may lead to reduced performance. We recommend keeping refresh rates for connected displays set to 60Hz.
   
   How to Change Display Refresh Rates in Windows:
   1. Right-click on the desktop and select Display settings.
   2. Select the display you want to adjust from the display arrangement diagram at the top of the window.
   3. Click Advanced display settings.
   4. Under Refresh rate select 60Hz from the dropdown menu.
   5. A prompt will appear asking if you want to save the setting change. Select Keep changes
      
      

How to Change Display Refresh Rates in macOS:

1. Click on the Apple menu and select System Settings.
2. Click Displays in the sidebar.
3. Select the display you want to adjust from the available options.
4. Click the Refresh Rate dropdown and select 60Hz.
   
   
5. Connect your laptop to a dedicated power supply if your dock does not support USB-C Power Delivery, as running on battery power can throttle CPU performance.
6. Update your system's BIOS, graphics drivers, and operating system to the latest versions provided by the manufacturer.
7. Keep static content like documents or emails on your DisplayLink-powered screens, and reserve dynamic applications like video games or CAD software for displays connected directly to your system's native graphics output.

Expected Result

Your external monitors connected to the DisplayLink-based device should run smoothly without latency or lagging performance during standard productivity tasks.

If the Issue Persists

If your DisplayLink-based displays are still performing poorly after completing these steps, please reach out to our support team at support@plugable.com for further assistance.

If you're using a DisplayLink-based Plugable product (dock or graphics adapter) with your Mac, you might encounter an issue where your external monitors remain blank. This can occur even though the DisplayLink Manager app is actively running. Additionally, the displays may not appear in your macOS Display Settings. A common cause is that the displays have unintentionally been "disabled" within the DisplayLink Manager.

How to fix it:

DisplayLink Manager 1.12 or later

1. Click on the DisplayLink Manager icon in your macOS menu bar at the top of your screen: 
   
2. Select the Displays tab
3. Ensure the toggle next to each display is set to the On position: 
   
4. Once toggled on, your external monitors should immediately become active and appear in your macOS Display Settings.

DisplayLink Manager 1.11 or earlier

1. Click on the DisplayLink Manager icon in your macOS menu bar at the top of your screen: 
   
2. Locate your connected displays listed here, and ensure the toggle next to each display is set to the On position: 
   
3. Once toggled on, your external monitors should immediately become active and appear in your macOS Display Settings.

At first glance, USB-C and Thunderbolt ports may look the same, but their capabilities can vary significantly. Understanding these differences is key to ensuring compatibility and getting the most out of your Plugable devices.

What is USB-C?

USB-C is a type of connector that supports a range of protocols including data transfer, video output, and charging. It's widely adopted across modern laptops, smartphones, tablets, and more.

Common USB-C Standards:

• USB 3.0 / 3.1 Gen 1: Up to 5Gbps data transfer.
• USB 3.2 Gen 2: Up to 10Gbps data transfer.
• USB 3.2 Gen 2x2: Up to 20Gbps data transfer.
• USB4: Up to 40Gbps data transfer, supports DisplayPort 1.4 and optional Thunderbolt 3 compatibility.

Note: USB-C ports may or may not support features like video output (DisplayPort Alt Mode) or USB Power Delivery (PD). Always check your device's specs.

What is Thunderbolt?

Thunderbolt is a hardware interface developed by Intel (in collaboration with Apple for earlier versions) that builds on USB-C, but adds advanced features and higher performance.

Thunderbolt Versions:

Thunderbolt 3:

• Up to 40Gbps data transfer
• Supports two 4K displays or one 5K display
• Supports USB, DisplayPort, and PCIe over a single cable
• Provides up to 100w of Power Delivery (PD)

Thunderbolt 4:

• Maintains Thunderbolt 3's speeds (40Gbps)
• Support for dual 4K or one 8K display
• Can be used with USB4 ports
• Provides up to 100w of PD

Thunderbolt 5:

• Up to 80Gbps bi-directional bandwidth, and up to 120Gbps in one direction for high-bandwidth applications (using Bandwidth Boost)
• Supports dual 6K displays or a single high-refresh-rate 8K display
• Backward compatible with Thunderbolt 4 and USB4
• Enhanced PCIe support and improved power efficiency
• Ideal for advanced gaming setups, content creation, and future-proof professional workflows

USB-C vs. Thunderbolt: Key Differences

How to Identify Each Port

• Thunderbolt ports often have a lightning bolt symbol next to the port.
• USB-C ports may be unmarked or show a symbol for power or DisplayPort.
• Refer to your laptop or device’s technical specifications for confirmation.

Compatibility Tips

• Thunderbolt 3/4/5 devices can typically connect to USB-C ports, but they will function at reduced capabilities (e.g., lower speeds, fewer display outputs).
• USB-C devices can connect to Thunderbolt ports and work normally, but won’t take advantage of Thunderbolt’s full capabilities.

Understanding whether your device supports USB-C, Thunderbolt, or both can help you choose the right Plugable docking station or adapter for your needs. If you run into any questions, feel free to reach out to our support team at support@plugable.com

Many users assume that USB-C devices can work with older Thunderbolt 2 Macs if they use a Thunderbolt 3 to Thunderbolt 2 adapter, such as the one made by Apple. However, this is not the case. These adapters are specifically designed to support Thunderbolt devices only - not standard USB-C peripherals.

While Thunderbolt 3 and USB-C share the same connector type, they use different underlying data protocols. Non-Thunderbolt USB-C devices, rely on USB standards for data and power. The Thunderbolt 3 to Thunderbolt 2 adapter does not carry USB signals; it only passes Thunderbolt data. Because of this, plugging a USB-C device into a Thunderbolt 2 Mac using this adapter will not work - the computer will not detect or communicate with the device.

If you need to connect peripherals to a Thunderbolt 2 system, we recommend using a USB-A dock or hub (if available on your system). This ensures compatibility without relying on unsupported adapter chains.

In short, even though the connectors may fit, USB-C devices are not compatible with Thunderbolt 2 Macs via Thunderbolt adapters - only Thunderbolt devices will work in that setup.

Yes, DisplayLink-based docking stations and USB graphics adapters can be used with desktop computers. However, for reliable performance, there's an important setup recommendation to follow.

Best Practice: Connect at Least One Monitor Directly to the Desktop

DisplayLink relies in part on your computer’s graphics processor (GPU) to function properly. On desktop systems, the GPU may not fully engage unless a display is connected directly to a native graphics output (e.g., HDMI, DisplayPort, DVI, or VGA).

If no direct connection exists, DisplayLink displays may show issues such as monitors not lighting up consistently.

Why This Happens

DisplayLink compresses and transmits display data over USB, but still depends on the system GPU to render content. When no monitor is connected directly to the GPU, the system may not initialize it correctly, leading to DisplayLink driver issues.

For a full technical overview, check out our Blog post: What is DisplayLink Technology, and How Does It Work?

Check Port Compatibility

Before connecting your DisplayLink product, make sure your desktop has the appropriate ports to support it:

• USB-C docks that require DisplayPort Alt Mode (e.g., some triple-display docks) need a USB-C port with video output capability.
• USB 3.0 graphics adapters or docks should be connected to a USB 3.0 port for best performance.
• If using older USB 2.0 ports, video performance will be limited.

Check your product and computer’s specifications to confirm port type and capabilities before setup.

Recommended Setup for Desktop Use

DO:

• Connect at least one monitor directly to the desktop’s native GPU output.
• Use DisplayLink displays as additional screens for expanding your workspace.

AVOID:

• Using only DisplayLink-connected displays with no direct GPU connection.

This setup ensures your graphics hardware is active and that DisplayLink drivers can function as intended.

After updating to macOS, some users may notice slower mouse movement, display lag, or jitter on external monitors connected through a DisplayLink-based dock or graphics adapter. This behavior is typically related to driver compatibility or display configuration changes introduced with major macOS updates.

The steps below outline the most common ways to restore smooth performance.

1. Install the Latest DisplayLink Manager

Typically speaking, you will want to keep yourself updated with the most recent DisplayLink drivers. The most recent version of DisplayLink that we’ve tested with our devices can be found below.

However, in some instances, this will not be the most up to date version of DisplayLink. In instances where the version above does not help, you can look for a potentially newer version on DisplayLink’s website here: https://www.synaptics.com/products/displaylink-graphics/downloads/macos 

Action:

• Visit the Plugable DisplayLink Drivers page
• Download and install the latest version of DisplayLink Manager for macOS (guides can be found for your specific version of macOS on the download page linked above)
• Restart your Mac after installation

2. Perform a Clean Installation of the DisplayLink Driver

If you upgraded macOS without removing the previous DisplayLink driver, leftover files can interfere with the new version.

Action:

• Download the DisplayLink Installation Cleaner from the Synaptics support site
• Run the cleaner tool to fully remove all DisplayLink components
• Restart your Mac
• Install the latest version of DisplayLink Manager

This clean installation process resolves the majority of display jitter and lag issues reported after macOS upgrades.

3. Verify External Display Refresh Rates

Many modern monitors default to high refresh rates such as 120Hz or 144Hz. While useful for gaming, higher refresh rates require more processing power when using USB-based video solutions like DisplayLink.

Action:

• Open System Settings
• Select Displays
• Choose each external monitor and set the refresh rate to 60Hz

Lowering the refresh rate significantly reduces CPU load and improves overall smoothness for office and productivity workloads.

4. Test with the Laptop Lid Open

On some MacBook models, closing the lid changes how macOS manages graphics resources. This can reduce available performance for external displays.

Action:

• Keep the MacBook lid open while using external monitors
• Check whether display responsiveness improves

If performance is better with the lid open, this configuration is recommended when using multiple external displays.

If Issues Continue

If you still experience lag or jitter after completing these steps, contact our support team with the following information:

• Mac model
• Plugable dock or adapter model
• A readout of our PlugDebug tool

You can reach our team via direct email at support@plugable.com or via our support page at https://plugable.com/pages/support 

Up to date graphics drivers are necessary for ensuring the best performance of your computer's built-in display, as well as the capability and compatibility with external displays and docking stations.

Windows has a built-in system update service: Windows Update, however this may not provide up to date drivers or timely updates. We often see systems with out of date drivers, in some cases systems may not receive updated graphics drivers for months or even years, leaving the computer with drivers incompatible with the installed version of Windows 11.

However, we can manually update the graphics drivers to ensure the best possible performance, reliability, and compatibility.

The first step is to identify the graphics hardware, then downloading, and installing the latest drivers.

Identifying Graphics Controller

For notebooks and many desktop computers, the primary graphics controller is embedded in the processor, both AMD and Intel provide graphics driver updates based on the processor model, as well as for discrete graphics controllers. Our first step is to identify up the processor or graphics hardware model details:

1. Right-click on the Start Menu and select Settings from the pop-up menu
2. From the left column select System and from the bottom of the right side select About
3. From the top of the about page the processor details will be on the right side, and duplicated lower down on the page.
   
4. In this example the processor is a 12th Gen Intel(R) Core(TM) i7-1260P, we'll keep that detail for the next step.

If your computer has two graphics controllers (it may show "Multiple GPUs Installed" under Graphics Card) then we can get the graphics card model details from the Windows System Information Utility.

1. Open the Start menu and search for "msinfo32"
2. Select the first result
3. From the left-column expand the Components section, then select Display
   
4. In this example the Intel Iris(R) Xe Graphics is enabled by the processor, while the Intel(R) Arc(TM) Pro B60 Graphics is a discrete graphics controller.

Downloading the Drivers

Intel Graphics

1. In a web browser navigate to the Intel Driver Download Page
2. In the "Search Drivers & Software" field, search for the Intel graphics card model or CPU model, "Arc Pro B60" in this example
   
3. Select the appropriate "Intel Arc Pro Graphics - Windows" or similar entry from the search results, for modern hardware Intel will normally have at least one release per month, the list should return recent results within the last month
4. Select the Download button to save the installer to your Downloads folder or selected location

AMD Graphics

AMD provides an Auto-Detect utility, this works relatively well and can be used to update the system available from the AMD Drivers and Support page.

This page also provides a search and browse option for finding drivers and specific compatibility details, we'll look up the drivers for an AMD Ryzen Pro 5650U processor with Radeon Graphics:

1. Navigate to AMD Drivers and Support page
2. From the Browse section, fill out the processor details and click the Submit button
   
3. Expand the "Windows 11 - 64-Bit Edition" section and select the Download button for the latest graphics drivers

NVIDIA Graphics

Like AMD, NVIDIA provides an automatic installation utility, as well as a Manual Driver Search on the NVIDIA Drivers support page. We will look up the drivers for an NVIDIA RTX 5080 graphics card.

1. Navigate to NVIDIA Drivers support page
2. Fill out the Manual Driver Search drop-downs and select the "Find" button when complete
   
3. From the search results, select the "View" button for the GeForce Game Ready Driver or NVIDIA Studio Driver (if you need the studio driver features)
4. Select the green Download button for the latest graphics drivers

Installing the Graphics Drivers

For the most part this is relatively simple, we recommend disconnecting any external docking stations or devices that are not necessary for the driver installation, and for notebook computers connecting the system's original power supply.

Double-click on the downloaded driver installation executable and follow the on screen steps.

For more in-depth details on Intel, AMD, and NVIDIA's driver installation processes check out our step-by-step guides here:

• Intel Driver Installation In Detail
• AMD Driver Installation In Detail
• NVIDIA Driver Installation In Detail

If you have any questions or would like a recommendation, feel free to reach out to our support at support@plugable.com

For a step-by-step guide to identify your graphics hardware and download the appropriate drivers, check out our KB article here

Download the drivers for your GPU or Processor Graphics

1. In a web browser navigate to the Intel Driver Download Page
2. In the Search Drivers & Software field, search for the Intel graphics card model or CPU model, "Arc Pro B60" in this example
3. Select the appropriate Intel Arc Pro Graphics - Windows or similar entry from the search results, for modern hardware Intel will normally have at least one release per month, the list should return recent results within the last month
4. Select the Download button to save the installer to your Downloads folder or selected location

Install the Intel Graphics Driver

To update the Intel Graphics Drivers to the latest version from Intel's website:

1. Save and close any open applications
2. Navigate to the downloaded graphics driver, then right-click on the saved driver installation file and select Run as administrator to start the installation process
3. Allow the Intel driver installation through the User account control window, the drivers will be extracted
   
4. When the extraction is complete select the Begin installation button
   
5. Agree to the Intel Software License Agreement by selecting the I agree button
   
6. Ensure all applications are saved and closed before selecting the I agree button
   
7. For most installations, we recommend not selecting the Execute a clean installation checkbox. This option will remove previous driver versions and can lead to Windows Update reverting to an even older graphics driver. Select the Start button to proceed
   
8. The installation process will proceed, but can take some time to complete
   
9. When the installation has completed, deselect the Launch Intel Graphics Software checkbox - we don't need that right now, select the Reboot Now button to restart the computer applying the new graphics drivers
   

Windows should now detect the Intel Graphics Controller in the Device Manager and show the latest drivers.

If you have any questions or would like a recommendation, feel free to reach out to our support at support@plugable.com

For a step-by-step guide to identify your graphics hardware and download the appropriate drivers, check out our KB article here

Download the drivers for your GPU or Processor Graphics

1. In a web browser navigate to the AMD Drivers and Support page
2. In the Search for your AMD product field, type in the model name, for example “RX 5600XT” for the AMD Radeon RX 5600 XT graphics controller, or a processor model like "AI 9 365", then select the best fitting result and select the Search button - note: Searching for a processor the "™" is required, so I recommend searching for the text after that symbol.
   
3. On the results page, expand the section for Windows 11 64-bit then select the Download button for the latest AMD Software: Adrenalin Edition drivers, AMD may not provide a direct download for all hardware, in that case use the Auto-Detect and Install option
4. Save the installer to your Downloads folder or selected location

Install the AMD Graphics Driver

To update the AMD Graphics Drivers to the latest version from AMD’s website:

1. Save and close any open applications
2. Navigate to the downloaded graphics driver, then right-click on the saved driver installation file and select Run as administrator to start the installation process
3. Allow the Intel driver installation through the User account control window, the drivers will be extracted
   
4. For most users the express installation is fine, ensure all applications are saved and closed selecting the Accept & Express Install button. If you have been having issues with older graphics drivers causing crashes or errors the Factory Reset (Optional) checkbox may be selected, but it isn’t necessary for most installations.
   
5. The installation will proceed, the displays may flicker or flash off/on while the drivers are installing.
   
6. When complete you will be prompted to Launch AMD Software: Adrenalin Edition and Keep AMD software up to date, you can uncheck the Launch AMD Software option
   
7. Restart the computer to ensure the latest drivers are loaded from boot Start Menu > Power Icon > Restart

Windows should now detect the Intel Graphics Controller in the Device Manager and show the latest drivers.

If you have any questions or would like a recommendation, feel free to reach out to our support at support@plugable.com

For a step-by-step guide to identify your graphics hardware and download the appropriate drivers, check out our KB article here

Download the drivers for your GPU

Check your invoice for the specific model of NVIDIA graphics card, for this example we will use the RTX 5080 (the manufacturer is not relevant).

1. In a web browser navigate to the NVIDIA Driver Download Page
2. In the Manual Driver Search field, search for the NVIDIA graphics card model, "RTX 5080" in this example
3. Select the GeForce RTX 50 Series | NVIDIA GeForce RTX 5080 | Windows 11 entry from the list
4. Left-click the Find button
5. Select either View buttons from the GeForce Game Ready Driver or NVIDIA Studio Driver
6. Select the Download button to save the installer to your Downloads folder or selected location

Install the NVIDIA Graphics Driver

To update the NVIDIA Graphics Drivers to the latest version from NVIDIA's website:

1. Save and close any open applications
2. Navigate to the downloaded graphics driver, then right-click on the saved driver installation file and select Run as administrator to start the installation process
3. Allow the NVIDIA driver installation through the User account control window
4. Click OK to extract the NVIDIA Display Driver package contents
   
5. At the System Check step, select either the NVIDIA Graphics Driver with NVIDIA App or the NVIDIA Graphics Driver alone, the NVIDIA App is gaming oriented and unnecessary for most users. Select AGREE AND CONTINUE
   
6. At the License Agreement step, select the Express (Recommended) radio button then select NEXT to continue
   
7. The installation will take some time to complete
   
8. When complete please restart the computer Start > Power > Restart
   

Windows should now detect the NVIDIA Graphics Controller in the Device Manager and show the latest drivers.

If you have any questions or would like a recommendation, feel free to reach out to our support at support@plugable.com

No, target display mode generally requires a direct Thunderbolt connection from a compatible MacBook or Mac Mini to a compatible iMac. Graphics adapters and docking stations do not pass the required Thunderbolt video data.

Why Target Display Mode Is Not Compatible With Docks or Adapters

Target Display Mode is a legacy feature that allows certain older Mac systems to use an older model iMac as an external display via a Mini DisplayPort or Thunderbolt data cable. Most Plugable docking stations and graphics adapters are USB devices that do not meet the specific Thunderbolt data requirements for 2011 through mid-2014 iMac systems. While Thunderbolt 3 or newer docks may provide video capability, they are generally recommended for Apple M-Series systems which do not support this feature.

iMac Models as Display

Apple provides system compatibility here but we can summarize it in the following:

24-inch and 27-inch iMac (2009 and 2010)

• macOS 10.13 “High Sierra” or earlier
• Compatible with Macs from 2019 or earlier with macOS 10.15 “Catalina” or earlier
  • NOTE: some MacBooks in this range do not include a Mini DisplayPort output and may not be compatible
• Connected with a Mini DisplayPort cable

iMac models (2011 through mid-2014)

• macOS 10.13 “High Sierra” or earlier
• Compatible with Macs from 2019 or earlier with macOS 10.15 “Catalina” or earlier
  • NOTE: some MacBooks in this range do not include a Mini DisplayPort output and may not be compatible
• Connected with a Thunderbolt or Thunderbolt 2 cable - these use the Mini DisplayPort connector
  • NOTE: This is not compatible with Thunderbolt 3 (USB Type-C) cables

Alternative Options

For earlier 2009-2010 iMacs, it may be possible to use a USB Type-C to DisplayPort adapter paired with a DisplayPort to Mini DisplayPort cable. However, this configuration is untested and we do not support this configuration.

Our research has shown mixed results using these early model iMac systems with adapters, modern unsupported Apple hosts, or Windows computers. Because Target Display Mode is no longer supported by modern Apple hardware and software, there is no guaranteed workaround for newer systems.

Modern displays offer higher resolutions, multiple connection options: both DisplayPort and HDMI, and newer features like High Dynamic Range (HDR) and higher refresh rates than iMac systems. Many modern displays can support multiple host computers either by switching between inputs or with picture-by-picture or picture-in-picture modes.

Applicable To

• 24-inch and 27-inch iMac (2009 and 2010)
• iMac models (2011 through mid-2014)
• macOS 10.13 “High Sierra” or earlier

If you have any questions please feel free to contact us at support@plugable.com and we'll be happy to help!