Multi-monitor options for your Thunderbolt 3 or USB-C MacBook

One of the most common pre-sales questions we get asked is, “What docking station is compatible with my Apple laptop, and how many displays in total can I add?”

The answer can vary dramatically depending on the specific model laptop in use. Before diving into the details, let’s look at a chart that lays out all of the Thunderbolt 3 and USB-C Apple laptop systems currently available, what Plugable docking stations and accessories are compatible and the total number of displays possible (you may have to use the horizontal slider under the chart to see all the information):

Using the chart above as a reference, let’s go through the different model Macs one at time based on the type of expansion ports they offer to provide some additional context.

Apple Thunderbolt 3 Laptops
Apple laptops that have Thunderbolt 3 support, such as the 2016 and 2017 model MacBook Pro models, have the most options available. For those in need of a docking station solution, the best option we offer is our TBT3-UDV Charging Dock with 60W charging capability (https://plugable.com/products/tbt3-udv/).

Plugable TBT3-UDV Thunderbolt 3 Docking Station w/60W Host Charging

Out of the box, the dock can be used to add one additional DisplayPort or HDMI display (using the included DisplayPort to HDMI adapter) to a MacBook Pro laptop with Thunderbolt 3.

When combined with one of our USB-C to video cables (such as our USB-C to HDMI cable -> https://plugable.com/products/usbc-hdmi-cable or our USB-C to DisplayPort cable -> https://plugable.com/products/usbc-dp) a second display can be connected to the dock.

We have a video demonstration showing the setup of the TBT3-UDV (https://youtu.be/vYrriLgcoN8) that can help provide context for those unfamiliar.

If more than two displays are needed, the options available depend on the type of internal graphics adapter built-in to the MacBook Pro.

All MacBook Pro 13” Thunderbolt 3 models have an internal Intel graphics adapter that is limited to a maximum of two external displays, so using a docking station with two displays as described above would be the maximum.

All MacBook Pro 15” Thunderbolt 3 models have what is known as switchable internal graphics adapters. They have both an Intel graphics adapter and a more capable (but more power hungry) AMD Radeon graphics adapter. As the name implies, the system can ‘switch’ between the two depending on need and in doing so allows for better battery life or higher performance.

The inclusion of the more powerful AMD Radeon graphics adapter allows the system to support a maximum of four external displays. Our Thunderbolt 3 Dual Display Adapters in DisplayPort (https://plugable.com/products/tbt3-dp2x-83) and HDMI (https://plugable.com/products/tbt3-hdmi2x-83/) variants are a good solution to allow the system to reach the maximum number of displays while using as few of the available Thunderbolt 3 ports in the system.

Plugable Thunderbolt 3 Dual HDMI Adapter (TBT3-HDMI2X-83) for Windows and Mac

For example, a MacBook Pro 15” model can have our TBT3-UDV dock connected to one Thunderbolt 3 port and drive two displays. One of our Thunderbolt 3 Dual Display Adapters can be connected to one of the Thunderbolt 3 ports on the opposite side of the laptop to add two additional displays bringing the grand total to four. This configuration still leaves two available Thunderbolt 3 ports in the system.

** An important note, our Thunderbolt 3 Dual Display Adapters must be connected to a Thunderbolt 3 port on the opposite side of the system compared to where the dock is connected. This is because the laptop has two Thunderbolt 3 controllers (one for each side) and they can each power two displays.

Our Thunderbolt 3 Dual Display Adapters and USB-C video cables can also be used individually on their own (without a docking station) to allow for additional displays to be added, within the confines mentioned earlier.

** Another important note, the maximum number of displays supported by either model laptop are finite when used with our products. The maximum number cannot be expanded regardless of what Plugable products are in use or how they are physically connected.

If a Thunderbolt solution proves too expensive for your needs, any of the USB-C docking stations we mention in the next section can also be used. This is because all Thunderbolt 3 ports can also function as a USB-C port.

Apple USB-C Only Laptops
With Apple laptops that have only USB-C support built-in such as the 2015, 2016 and 2017 MacBook models (notice the absence of the ‘Pro’ designation and hence the lack of Thunderbolt 3 support) the options are more limited. A MacBook with only a USB-C port is limited to a maximum of one external display.

Given those limitations, our UD-CAM dock (https://plugable.com/products/ud-cam) is a good solution to add one additional HDMI display, charge the laptop with up to 85W of power as well as provide additional USB ports, a wired gigabit Ethernet and a combination audio input/output jack.

Plugable UD-CAM Docking Station

Another dock option is our UD-CA1A dock (https://plugable.com/products/ud-ca1a/) that provides a slightly different configuration compared to the UD-CAM. The UD-CA1A provides up to 60W of power to charge the laptop and has a slightly different arrangement in terms of the number USB ports, audio jacks, and orientation as compared to the UD-CAM

UD-CA1A Docking Station

If a full-size docking station is not required, our USB-C Mini Dock (https://plugable.com/products/usbc-md101/) is a portable addition for MacBook users that can provide one additional HDMI display, a single USB 3.0 port and pass-through charging capabilities.

Plugable USB-C Mini Dock (USBC-MD101)

Of course, one of our USB-C video cables such as the USB-C to DisplayPort and USB-C to HDMI cable can also be used on their own.

Finally, any of our USB-C docking station products referenced above can be also used with a Thunderbolt 3 Apple laptop. This is because all Thunderbolt 3 ports can also function as a USB-C port.

Apple Laptops without Thunderbolt 3 or USB-C
For earlier Apple systems that do not have either Thunderbolt 3 or USB-C ports, the options get much more limited. In previous generation systems, typically the only option to provide a single additional display was a mini-DisplayPort output or Thunderbolt 1 or Thunderbolt 2 output built-in to the system (they all share the same physical connector type). These could be used to connect to a single DisplayPort or Thunderbolt display. If a HDMI display is necessary, our mini-DisplayPort to HDMI adapter (MDP-HDMI -> https://plugable.com/products/mdp-hdmi/) can be used along with a HDMI cable.

Conclusion
Apple Mac systems with Thunderbolt 3 support have the most options when it comes to adding additional displays. Apple Mac systems with USB-C only are more limited, but can still have multiple options. Legacy Mac systems without Thunderbolt 3 or USB-C are unfortunately the most limited, Hopefully we have helped clear up what options are available for your Apple Mac laptop, and if not please reach out to us directly via support@plugable.com (or post in the comments below) and we will be happy to help.

29 comments on “Multi-monitor options for your Thunderbolt 3 or USB-C MacBook”

  1. joevt Reply

    A single Thunderbolt 2 port (such as on the MacBook Pro 2015) can output one 4K 60 Hz display or two 2560 x 1600 60 Hz displays. For example, two Thunderbolt displays can be chained together. Note that the limit of 2 displays per Thunderbolt controller is the same as Thunderbolt 3.

    You can also use any of the Thunderbolt 3 solutions with a Thunderbolt 2 Mac with an Apple Thunderbolt 3 to Thunderbolt 2 adapter (other similar adapters are not bidirectional – they can only allow Thunderbolt 2 devices to be used with Thunderbolt 3 computers).

    To use a Plugable Thunderbolt 3 Dual Display Adapter with a Thunderbolt 2 Mac, you also need a Thunderbolt 3 device with two Thunderbolt 3 ports (such as a dock or a raid or an expansion chassis) because the Plugable and Apple adapters both contain a non-detachable USB-C male connector (why?) that cannot be connected together directly.

    If the Mac is running Windows, then multiple MST displays (chaining) or a MST hub can be used. The maximum number is limited by the graphics controller/driver. The maximum resolution is limited by the bandwidth of the supported version of DisplayPort and the resolution of the other MST displays. macOS does not support MST (because Apple) except in the case of old 4K displays which used MST for the left and right half of the display.

  2. TitanRidge Reply
    • Gary Zeller Reply

      Thanks for posting! For those who aren’t familiar, Ifixit teardowns are always a great resource.

      We’re hopeful that the Mid 2018 MBP systems will have good compatibility, and ours should be arriving in the next few days so we can test and confirm. We’ll be posting a new video on YouTube and updating our website with our results.

  3. DonTay Reply

    If my macbook has two thunderbolt 3 ports, could I add two of the tbt3-hdmi2x-83 adapters to add four monitors?

    • Bob Boerner Reply

      The maximum number of external displays a MacBook Pro or MacBook Air with Thunderbolt 3 ports built-in can support is determined by the system’s internal graphics adapter. Systems with an Intel graphics adapter support a maximum of two external displays. Systems with an AMD graphics adapter support a maximum of four displays.

      Apple provides this information in their system specifications published here -> https://support.apple.com/en-us/HT201300 and here -> https://support.apple.com/en-us/HT201862

      To the best of our knowledge, all Apple Mac laptops with two Thunderbolt 3 ports have an Intel graphics adapter. As a result, only two external displays are supported. To put that another way, what you describe will not work. Please reach out to us directly via support@plugable.com if you have any additional questions.

  4. DonTay Reply

    The Macbook actutally has 4 TB3 ports. Based on my specs below, it sounds like it will work:

    15.4″ 2880 x 1800 Retina Display
    AMD Radeon Pro 555 Graphics (2GB GGDR5)
    4 x Thunderbolt 3 (USB Type-C) Ports

    • Bob Boerner Reply

      Thank you for getting back with the additional information. A MacBook Pro system with four Thunderbolt 3 ports and an AMD graphics adapter will support four external displays via two of our TBT3-HDMI2X-83 adapters.

      An important note, as I describe in the blog post above, each adapter must be connected to Thunderbolt 3 ports on opposite sides of the system. This is because the laptop has two Thunderbolt 3 controllers (one for each side) and they can each power two displays.

  5. Jake Reply

    I’ve found a bunch of Thunderbolt 3 adapters and docking stations that support dual monitors, but in my tests, they don’t allow you to use two external monitors in extend mode (as opposed to mirror mode) using a 2018 Macbook Pro. Is a Macbook Pro even capable of doing two external displays in extend mode?

    • Bob Boerner Reply

      All Apple 2018 MacBook Pro systems support a minimum of two external displays via Thunderbolt 3, and those displays can be configured in ‘Extended’ mode (each display showing different content). This can be accomplished for example using our Thunderbolt 3 Dual HDMI display adapter known as the TBT3-HDMI2X-83 –> https://plugable.com/products/tbt3-hdmi2x-83 Apple calls this out in their specifications for the system here –> https://support.apple.com/kb/SP775?locale=en_US

      You don’t mention which specific product you tested the original behavior with, however based on your description it sounds like the device you used had an internal DisplayPort Multi-stream transport hub (MST) within the unit. macOS does not support DisplayPort MST, so if a device with DisplayPort MST is used with a macOS system the displays will show a ‘duplicate’ or ‘mirror’ image (each display showing identical content).

      Please reach out to us directly via https://plugable.com/support/email/ if you have any additional questions.

    • joevt Reply

      macOS does not support multiple displays via DisplayPort MST. An example of a Thunderbolt 3 dock that has MST is the HP Thunderbolt Dock G2. It contains an MST hub with 3 outputs connected to two DisplayPort ports, and a USB-C with DisplayPort alt mode port. The dock also contains a VGA port that takes away the DisplayPort connection from the USB-C port when used. The dock is Thunderbolt 3, with one DisplayPort signal that can go to the MST hub and another DisplayPort signal that can go to the Thunderbolt port. So you can use it to connect two displays for macOS, but only if one display is connected to the MST hub and the other is connected to the Thunderbolt port. I believe Dell makes a similar dock. Any Thunderbolt dock that supports more than one display where one of the displays does not need to be connected to the Thunderbolt port is using an MST hub.

  6. Pao Reply

    A quick question. I have a mac book pro 15″ Mid- 2012. I would like to be able to use 3 to 4 monitors in an extended mode. I have three monitors with VGA, DVI and VGA. I bought Displaylink Wavlink USB 3 dual video docking but it did not work. What plugable product can help me to use 3 monitors with my old mac book pro Mid-2012. Thank you

    • Bob Boerner Reply

      Hi Pao,

      Since your MacBook Pro 2012 model does not have USB-C or Thunderbolt 3 ports built-in, I am afraid we do not have a solution to offer. To expand further, the only other video products we offer that can connect to the USB 3.0 ports your system has use DisplayLink technology (the same as in the Wavlink dock you mention), and we do not support our DisplayLink-based products on the Mac platform. Apologies we could not be of help in this specific case.

  7. Max Osinga Reply

    Dear team,

    which of these options would allow to have two different external displays with my Lenovo Yoga C940 with 2 Thunderboldt 3 / USB-C outputs?

    • Bob Boerner Reply

      Hi Max,

      The blog post you are commenting on is geared toward Apple Mac systems. In order to make an informed recommendation for your Lenovo Yoga C940 running Windows, we will need some additional information. Please email support@plugable.com with the output of our PlugDebug utility (http://plugable.com/support/plugdebug) and the brand and specific model numbers of both of the external displays you intend to use so that we may assist.

  8. Josh W Reply

    Hi there, I am contemplating buying a new 2020 Macbook Air, but I’d like to support three external 1080p monitors. Is there a solution? Apply says it will only support two 4k external monitors, but I don’t know if that’s simply an power/output issue (meaning three 1080p monitors would be OK since they’d use much less output than 2 4ks), or if it’s a software thing — i.e., OSX won’t let me recognize and run 3 external monitors regardless. Thanks for any thoughts.

    • Bob Boerner Reply

      Hi Josh,

      According to the specifications of the 2020 MacBook Air model you are considering –> https://support.apple.com/kb/SP813?locale=en_US the system supports only two external displays (as you mention). This limitation is regardless of the resolution of the external displays, it is a result of the capabilities of the system’s internal graphics processing unit (GPU). Plugable does not offer any products that are supported on the Mac platform that will circumvent this limitation. Apologies we do not have a solution to offer in this specific case…

    • joevt Reply
  9. Alex Reply

    Hi,
    I need help with this matter:

    My Macbook Pro 2017 15″ has graphic cards Radeon Pro 555 2 GB and Intel HD Graphics 630 1536 MB.
    There are 3 monitors connected to its Thunderbolt 3 ports by HDMI – USB-C cables. I want to get an extended monitor on the two of the connected monitors – the information from one screen to continue to the other one, like in this video https://www.youtube.com/watch?v=OQo8MmAUHK4

    Do I need to make some graphic card adjustments or something else…

    • Bob Boerner Reply

      The video you linked to shows a single video playback application (VLC) that has been manually positioned so that it ‘straddles’ the boundaries of two physical displays. You can recreate this state by making sure the application is not in full-screen mode and dragging it into position.

      That said, my impression is that what you really want is to have a full-screen application ‘span’ across the entirety of two physical displays as if they were both one single display. macOS does not have any built-in ability to ‘span’ across displays, so I am afraid this would not be possible.

      If you are using a Plugable branded product and have any additional questions, please reach out to us directly via support@plugable.com and we will be happy to assist. Thank you.

      • Alex Reply

        Dear Mr. Boerner,

        Thank you very much for your fast reply. Correct, I want the information coming from a remote computer to be ‘spanned’ across the entirety of the two physical displays and to get one virtual screen. Could you direct me to some application that could do that or direct me to some other method of doing that…

        I greatly appreciate your help!

        • Bob Boerner Reply

          Hi Alex,

          I am afraid we have no experience with any such application, so unfortunately we are unable to make any recommendations. Apologies we cannot be of more help here…

        • joevt Reply

          Have you tried unselecting “Displays have separate Spaces” in Mission Control preferences panel? Then you can make windows span multiple monitors.

  10. alan dani Reply

    Is there any adaptor that works with MacBook Pro 2015 to connect two external monitors for “extended displays” (i.e., not mirror displays)?

    • Joshua Henry Reply

      Thanks for asking! Unfortunately we don’t make any USB graphics adapters or docking stations that are compatible with your model MacBook Pro at this time. This is primarily due to issues with the drivers used by many of our offerings and macOS. (https://plugable.com/2019/10/10/plugable-displaylink-products-and-macos-catalina-10-15/) Your best solution would be to look for a Thunderbolt 2 docking station for this particular system since it doesn’t support our USB-C/Thunderbolt 3 options that we would recommend for newer Mac systems. Thanks and best wishes!

    • joevt Reply

      If you want to connect two displays to a single Thunderbolt port then you need two Thunderbolt 2 docks (because Thunderbolt 2 docks only support one display each) or a Thunderbolt 3 dock (Thunderbolt 3 docks can support two displays). Since the MacBook Pro 2015 only has Thunderbolt 2, then the displays will be limited to 2560×1600 60Hz or 4K 30Hz. If you choose a Thunderbolt 3 dock, then you also need an Apple Thunderbolt 3 to Thunderbolt 2 adapter.

      If you want to use a Thunderbolt 3 to dual DisplayPort or HDMI adapter, you need to connect it to a Thunderbolt 3 device that has two Thunderbolt 3 ports because the Apple Thunderbolt 3 to Thunderbolt 2 Adapter has a male Thunderbolt 3 connector which cannot be connected to the male Thunderbolt 3 connector of the dual display adapter.

      When connecting two displays to a single Thunderbolt 2 port, the first display connected must be a display that requires only four lanes of HBR (or two lanes of HBR2). The second display connected can be a 4K 60Hz display but it will be limited to resolutions supported by four lanes of HBR (e.g. 4K 30Hz or 1440p 60Hz). This is because Thunderbolt allocates bandwidth when displays are connected, and lowering the resolution does not allow more bandwidth to be given to a second display.

      If you want to support two larger displays (4K 60Hz), then each display needs to be connected to a different Thunderbolt 2 port.

  11. Juliette S Vo Reply

    Hi Bernie and Team,

    I love Apple screens and have purchased 4k monitor as a substitute but, Apple is still what I liking. Thus my issues, I currently have a MacBook Air 2018 and I would love a solution to connect both 24″ and 27 ” old Apple monitor together.

    Plus, I will be adding extreme, headsets, DSL camera to my system so please keep those ports in line. I look for to hearing back from you…
    Juliette

    • Bob Boerner Reply

      Hi Juliette,

      I am afraid that Plugable does not offer any products that will allow you to connect your older Apple displays to your MacBook Air 2018 laptop.

      As a result, I am afraid we do not have any solutions to offer.

      Apologies that we could not be of more help in this specific case…

Leave a Reply to Josh W Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.